andreas.pah...@gmx.de writes: > Hi guys, > one of our TeleMega devices shows a very strange behavior with its > pyro channels Apogee and D. > Both of them show no continuity, which means 0,00 V reading of the > corresponding igniter voltage.
If you have a voltmeter, probing around to see if there's actually voltage on the board would be a good thing to do. > Also, when fired manually they do nothing at all. That makes me think not. > I can't see any damage on neither the board nor the components. Also, > the circuit diagram and PCB layout lets me see no direct correlation > between the two channels. I agree, this is very strange. Probing the board using a voltmeter with the help of the schematic and PCB artwork may help you figure out what is going on. If not, I can open an RMA for you to send the board back to me for diagnosis and repair if necessary. Bdale
signature.asc
Description: PGP signature
_______________________________________________ altusmetrum mailing list altusmetrum@lists.gag.com http://lists.gag.com/mailman/listinfo/altusmetrum
