Um, please check with your L3CC.....quite a few of them do NOT want you to fly with switches in series with your charges !!
Best regards; Bob F. On Fri, Apr 15, 2016 at 9:57 AM, Rob Derstadt <[email protected]> wrote: > Hello, > > I'm trying to work out how to wire up the outputs of two Telemetrums (one > primary, one backup) so that I can add an extra arm/disarm rotary switch > between the outputs and the terminal blocks (the NAR L3 requirement to cut > power completely from the pyro's). > > This is my initial wiring diagram: > > > https://github.com/robderstadt/NAR-L3-Project/blob/master/images/plans/GizmoXL_Wiring.png > > Normally I'd just *try* it and see what happens, but I don't want to fry > two board if I get it wrong. I'm also concerned that in the "safe" position > that the continuity indicator on each board would still indicate everything > green, which could lead to a launch with the pyro's inhibited. > > Has anyone flown this configuration before? If so, any suggestions on how > to hook it up? > > Thanks guys. > > -Rob > > _______________________________________________ > altusmetrum mailing list > [email protected] > http://lists.gag.com/mailman/listinfo/altusmetrum > >
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
