Rob,
A higher res image would be a help.
Why are you using different wiring schemes for the two units? You have
enough switch contacts so why are you tying some of the lines
together? I'd make them totally separate and wired the same to avoid
confusion.
Terry
On 4/15/2016 9:57 AM, Rob Derstadt wrote:
Hello,
I'm trying to work out how to wire up the outputs of two Telemetrums
(one primary, one backup) so that I can add an extra arm/disarm rotary
switch between the outputs and the terminal blocks (the NAR L3
requirement to cut power completely from the pyro's).
This is my initial wiring diagram:
https://github.com/robderstadt/NAR-L3-Project/blob/master/images/plans/GizmoXL_Wiring.png
Normally I'd just *try* it and see what happens, but I don't want to
fry two board if I get it wrong. I'm also concerned that in the "safe"
position that the continuity indicator on each board would still
indicate everything green, which could lead to a launch with the
pyro's inhibited.
Has anyone flown this configuration before? If so, any suggestions on
how to hook it up?
Thanks guys.
-Rob
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
