"Tim Navickas" <[email protected]> writes: > It has been a while since I used my TeleGPS and I am having problems. > I can connect to it via ALTOS with a USB cable but not with the tele > Dongle or Tele BT. I know the call sign and channel is correct on all > devices. Any suggestions?
Hrm. If you have a USB cable plugged in, the unit will be in idle/interactive mode. For TeleGPS, you have to disconnect that cable for it to start transmitting position reports. With a USB cable plugged in, it just sits there. Might that be the problem? > Also, what LED's should light up when I plug in the battery. None are > lit and I know the battery is charged. There is one green LED hooked to the processor, and a green/red pair hooked to the LiPo charger. If USB and battery are plugged in, one of the two LEDs on the battery charger should light. If no USB is attached, both of those should be dark. I think the green LED on the processor should flash briefly during power up, but the flash might be short enough to be hard to catch? Then I think that LED blinks every 3 seconds once GPS lock is acquired. Did I get that right, Keith? If so, we should probably add that to the TeleGPS docs somewhere... Bdale
signature.asc
Description: PGP signature
_______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
