So I can now connect to the TeleGPS. I had it programmed for Channel 12 like all my other altimeters. When I changed it back to Channel 0 it connected. Can I not use other channels on the TelleGPS? They work great on all the altimeters( trying to avoid sharing channels)
My new problem is I cannot get GPS lock. It has been on for 20 minutes but sees no satellites. Battery, Receiver Battery , and Data Logging are all Green but both GPS are Red. Any thoughts? My three other Telemetrum's went into GPS lock pretty quick. Thanks, Tim -----Original Message----- From: Keith Packard <[email protected]> Sent: Friday, March 29, 2019 12:21 AM To: Bdale Garbee <[email protected]>; Tim Navickas <[email protected]>; 'Altus Metrum' <[email protected]> Subject: Re: [altusmetrum] TeleGPS V2 Bdale Garbee <[email protected]> writes: > I think the green LED on the processor should flash briefly during > power up, but the flash might be short enough to be hard to catch? > Then I think that LED blinks every 3 seconds once GPS lock is > acquired. Did I get that right, Keith? If so, we should probably add > that to the TeleGPS docs somewhere... Yeah, off for three seconds, on for 20 milliseconds when GPS lock is acquired. -- -keith _______________________________________________ altusmetrum mailing list [email protected] http://lists.gag.com/mailman/listinfo/altusmetrum
