Andrew,
I just use a length of solid hook up wire about 6.5" long on my
unit. Works as good as or better than an expensive commercial antenna.
Just solder it directly to the board, no connector needed.
Terry
On 4/30/2019 6:51 PM, Plugger Lockett wrote:
Hi Bdale and Keith,
Recently I flew my TeleGPS v1.0 on a non-nominal flight which resulted
in the telemetry/downlink antenna being sheared off. There might be an
inch of antenna remaining connected to the board. The board itself
appears fine, I'm able to connect to it via AltOS and everything
appears to be working. So it seems I only need to repair the antenna
to get this tracker back in a usable condition.
Is this something I can easily repair myself? If so, can I get some
guidance on that including what I should use as a replacement antenna?
If it's something I should not attempt to do myself please let me know
where I should send it along with the costs associated with the repair
and I'll get the process started.
Thanks for all of your help.
Kind Regards,
Andrew Hamilton
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
_______________________________________________
altusmetrum mailing list
[email protected]
http://lists.gag.com/mailman/listinfo/altusmetrum
