Bryan Duke <[email protected]> writes: > I recently bought a new TeleMini and just sat down to mount it to an > avbay. I noticed the switch terminal block is loose. The solder joints > look good and the internal metal posts don’t move when I wiggle it. It > looks like the only parts that move are the green case, the screws and > the clamps. There is a space between the PCB and the bottom of the > green case (maybe 0.75mm on one side). I’m hoping I can just put a dab > of epoxy between the green case and the PCB to secure it.
You could probably fly with it as-is and be ok, but I understand why you don't want to. So .. your plan should work fine. The other option is re-heat the two solder joints while pushing the block down closer to the board. That's what I'd do, but then, I've spent way too many hours of my life doing precision soldering on fine-pitch boards. A dab of epoxy will certainly do just as well for you and puts the board at less risk if soldering on a board like this isn't comfortable for you. Good luck with the fix, and the flight! Bdale
signature.asc
Description: PGP signature
_______________________________________________ altusmetrum mailing list -- [email protected] To unsubscribe send an email to [email protected]
