Hello Keith, Bdale & everybody,
I recently bought a new TeleMini and just sat down to mount it to an avbay. I
noticed the switch terminal block is loose. The solder joints look good and the
internal metal posts don’t move when I wiggle it. It looks like the only parts
that move are the green case, the screws and the clamps. There is a space
between the PCB and the bottom of the green case (maybe 0.75mm on one side).
I’m hoping I can just put a dab of epoxy between the green case and the PCB to
secure it.
I’m planning on using this in a record attempt in a few weeks. The rocket will
get a fairly abnormal amount of abuse with multiple 80G launches that weekend.
I don’t think it’ll be a problem, but I wanted to be sure.
Here’s a video showing how much it moves. The ejection charge block is solid.
The switch one moves…
https://imgur.com/a/9Oiwl7p
Soooo…epoxy it & move on?
Thanks,
Bryan
_______________________________________________
altusmetrum mailing list -- [email protected]
To unsubscribe send an email to [email protected]
