OK it looks like "eject" has to be "0" or else the drive ejects the
multi-tape carrier cartridge.
I try to run "amtape dds4 show" just to check if it can cycle through
the tapes--the tapes aren't labeled yet, so I expect "Input/output
error" but it should still be able to eject and load the tapes
sequentially--and this is what happens:
amtape: scanning all 7 slots in tape-changer rack:
slot 0: reading label: Input/output error
amtape: could not load slot 1: slot 1 move failed
I have attached chg-scsi.debug and the contents of /proc/scsi/scsi (it's
on a RH 7.0 Linux system w/ RH 2.2.16-22 kernel).
The autoloader is SCSI ID 12 with LUN 0 the tapedrive and LUN 1 the
changer device.
--
"Jonathan F. Dill" ([EMAIL PROTECTED])
CARB Systems and Network Administrator
Home Page: http://www.umbi.umd.edu/~dill
chg-scsi: debug 1 pid 2594 ruid 404 euid 404 start time Thu Nov 16 14:34:21 2000
ARG [0] : /usr/local/libexec/chg-scsi
ARG [1] : -slot
ARG [2] : next
Number of configurations: 1
Tapes need eject: No
Tapes need sleep: 90 seconds
Cleancycles : 100
Changerdevice : /dev/sg4
Tapeconfig Nr: 0
Drivenumber : 0
Startslot : 0
Endslot : 6
Cleanslot : 7
Devicename : /dev/nst1
changerident : none
SCSITapedev : /dev/sg4
tapeident : none
statfile : /usr/local/etc/amanda/dds4/tapestatus
Slotfile : /usr/local/etc/amanda/dds4/tape0-slot
Cleanfile : /usr/local/etc/amanda/dds4/tape0-clean
Usagecount : /usr/local/etc/amanda/dds4/totaltime
##### START OpenDevice
OpenDevice : /dev/sg4
SCSI_OpenDevice : use SG interface
SCSI_OpenDevice : current timeout 6000
SCSI_OpenDevice : timeout set to 60000
##### START SCSI_Inquiry
SCSI_Inquiry start length = 56:
##### START DecodeSCSI
SCSI_ExecuteCommand : INQUIRY 12 00 00 00 38 00
##### STOP DecodeSCSI
08 80 02 02 1F 00 08 30 53 4F 4E 59 20 20 20 20 .......0SONY....
54 53 4C 2D 31 31 30 30 30 20 20 20 20 20 20 20 TSL.11000.......
4C 31 30 30 00 00 00 00 00 04 09 00 00 00 00 00 L100............
00 00 00 00 00 05 09 00
SCSI_Inquiry : end 0
##### START PrintInquiry
qualifier 0
type 8
data_format 2
ansi_version 2
ecma_version 0
iso_version 0
type_modifier 0
removable 1
vendor_info SONY
prod_ident TSL-11000
prod_version L100
vendor_specific
using ident = generic, type = Generic driver tape/robot [generic]
##### START OpenDevice
OpenDevice : /dev/nst1
SCSI_OpenDevice : checking if /dev/nst1 is a sg device
No link /dev/nst1
using ident = generic, type = Generic driver tape/robot [generic]
##### START OpenDevice
OpenDevice : /dev/sg4
SCSI_OpenDevice : use SG interface
SCSI_OpenDevice : current timeout 6000
SCSI_OpenDevice : timeout set to 60000
##### START SCSI_Inquiry
SCSI_Inquiry start length = 56:
##### START DecodeSCSI
SCSI_ExecuteCommand : INQUIRY 12 00 00 00 38 00
##### STOP DecodeSCSI
08 80 02 02 1F 00 08 30 53 4F 4E 59 20 20 20 20 .......0SONY....
54 53 4C 2D 31 31 30 30 30 20 20 20 20 20 20 20 TSL.11000.......
4C 31 30 30 00 00 00 00 00 04 09 00 00 00 00 00 L100............
00 00 00 00 00 05 09 00
SCSI_Inquiry : end 0
##### START PrintInquiry
qualifier 0
type 8
data_format 2
ansi_version 2
ecma_version 0
iso_version 0
type_modifier 0
removable 1
vendor_info SONY
prod_ident TSL-11000
prod_version L100
vendor_specific
using ident = generic, type = Generic driver tape/robot [generic]
###### START get_drive_count
get_drive_count : fd 5
##### START GenericElementStatus
##### START SCSI_ModeSense
SCSI_ModeSense start length = 255:
##### START DecodeSCSI
SCSI_ExecuteCommand : MODE SENSE 1A 08 3F 00 FF 00
##### STOP DecodeSCSI
SCSI_ModeSense end: 0
##### START DecodeModeSense
33 00 00 00 1C 0A 08 00 00 00 00 00 00 00 00 00 3...............
1D 12 00 00 00 01 00 02 00 08 00 00 00 00 00 01 ................
00 01 00 00 1F 0E 0A 00 00 08 00 02 00 00 00 00 ................
00 00 00 00 00 05 09 00 00 00 00 00 00 00 00 00 ................
00 06 09 00 00 00 00 00 00 00 00 00 00 07 09 00 ................
00 00 00 00 00 00 00 00 00 08 09 00 00 00 00 00 ................
00 00 00 00 00 09 09 00 00 00 00 00 00 00 00 00 ................
A8 A9 14 BE 03 80 36 C1 E0 36 07 D0 00 00 00 00 ......6..6......
00 0C F3 E2 8A A5 52 94 2A A2 85 15 2A 88 25 12 ......R.........
90 92 92 95 4A 84 24 25 40 92 AA 54 49 48 24 80 ....J......TIH..
4A 45 11 09 54 A2 4B E7 BC 3A A1 DE E1 50 40 B9 JE..T.K......P..
C7 40 FA 09 77 A5 EC D3 2D B7 DC CA 74 DB 49 DE ....w.......t.I.
DD E9 DB 49 54 94 27 87 DE A0 0B EC 2F AF 08 FB ...IT...........
B7 10 D6 04 66 06 1B 01 86 EE 03 8E 60 61 DD C0 ....f........a..
E1 AC 10 D6 08 BD BB D3 D3 54 14 12 6E BC 00 00 .........T..n...
7B DE F0 46 EE 07 1C C3 1D DC 38 DD C3 8E 63
buffer length = 47
DecodeModeSense : Element Address Assignment Page
Medium Transport Element Address 0
Number of Medium Transport Elements 1
First Storage Element Address 2
Number of Storage Elements 8
First Import/Export Element Address 0
Number of ImportExport Elements 0
First Data Transfer Element Address 1
Number of Data Transfer Elements 1
DecodeModeSense : MT can store data cartridges 0
DecodeModeSense : ST can store data cartridges 1
DecodeModeSense : IE can store data cartridges 0
DecodeModeSense : DT can store data cartridges 1
DecodeModeSense : MT to MT 0
DecodeModeSense : MT to ST 0
DecodeModeSense : MT to IE 0
DecodeModeSense : MT to DT 0
DecodeModeSense : ST to MT 0
DecodeModeSense : ST to MT 0
DecodeModeSense : ST to DT 1
DecodeModeSense : IE to MT 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : IE to ST 0
DecodeModeSense : DT to MT 0
DecodeModeSense : DT to ST 1
DecodeModeSense : DT to IE 0
DecodeModeSense : DT to DT 0
##### START BarCode
BarCode : fd 5
Ident = [TSL-11000], function = [generic]
##### START NoBarCode
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 01 00 00 00 01 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 1C, ret 0
00 00 00 01 00 00 00 14
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 01 00 00 00 01 00 00 00 1C 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 00 00 01 00 00 00 14 01 00 00 0C 00 00 00 0C ................
00 00 00 00 00 00 00 00 00 00 00 00
##### START BarCode
BarCode : fd 5
Ident = [TSL-11000], function = [generic]
##### START NoBarCode
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 02 00 02 00 08 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 70, ret 0
00 02 00 08 00 00 00 68
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 02 00 02 00 08 00 00 00 70 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 02 00 08 00 00 00 68 02 00 00 0C 00 00 00 60 .......h........
00 02 08 00 00 00 00 00 00 00 00 00 00 03 09 00 ................
00 00 00 00 00 00 00 00 00 04 09 00 00 00 00 00 ................
00 00 00 00 00 05 09 00 00 00 00 00 00 00 00 00 ................
00 06 09 00 00 00 00 00 00 00 00 00 00 07 09 00 ................
00 00 00 00 00 00 00 00 00 08 09 00 00 00 00 00 ................
00 00 00 00 00 09 09 00 00 00 00 00 00 00 00 00 ................
##### START BarCode
BarCode : fd 5
Ident = [TSL-11000], function = [generic]
##### START NoBarCode
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 04 00 01 00 01 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 1C, ret 0
00 01 00 01 00 00 00 14
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 04 00 01 00 01 00 00 00 1C 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 01 00 01 00 00 00 14 04 00 00 0C 00 00 00 0C ................
00 01 09 00 00 00 30 0C 00 00 00 00
Media Transport Elements (robot arms) :
Element #0000 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 1 From = -001
TAG =
Storage Elements (Media slots) :
Element #0002 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0003 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0004 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0005 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0006 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0007 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0008 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0009 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Data Transfer Elements (tape drives) :
Element #0001 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 4 From = -001
TAG =
SCSI ADDRESS = 12
Import/Export Elements :
###### START drive_loaded
drive_loaded : fd 5 drivenum 0
###### START unload
unload : fd 5, slot 0, drive 0
unload : unload drive 0[1] slot 0[2]
##### START GenericMove
GenericMove : from = 1, to = 2
##### START LogSense
##### START SCSI_TestUnitReady
##### START DecodeSCSI
SCSI_ExecuteCommand : TEST UNIT READY 00 00 00 00 00 00
##### STOP DecodeSCSI
##### START GenericRewind
##### START DecodeSCSI
SCSI_ExecuteCommand : REWIND 01 01 00 00 00 00
##### STOP DecodeSCSI
##### START DecodeSense
GenericRewind : Sense Keys
ErrorCode 70
Valid 0
ASC 24
ASCQ 00
Sense key 05
Illegal Request
##### START SCSI_TestUnitReady
##### START DecodeSCSI
SCSI_ExecuteCommand : TEST UNIT READY 00 00 00 00 00 00
##### STOP DecodeSCSI
GenericRewind : Ready after 0 sec, true = 0
LogSense
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 40 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 47 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 6E 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 73 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 7E 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START LookupElement
##### STOP LookupElement (DTE)
##### START LookupElement
##### STOP LookupElement (STE)
CheckMove : checking if move from 1 to 2 is legal
CheckMove : DT2ST
##### START SCSI_Move
##### START DecodeSCSI
SCSI_ExecuteCommand : MOVE MEDIUM A5 00 00 00 00 01 00 02 00 00 00 00
##### STOP DecodeSCSI
SCSI_Move : SCSI_ExecuteCommand = 0
##### START DecodeSense
SCSI_Move :Sense Keys
ErrorCode 00
Valid 0
ASC 00
ASCQ 00
Sense key 00
No Sense
SCSI_Move : end 0
##### START GenericElementStatus
##### START BarCode
BarCode : fd 5
Ident = [TSL-11000], function = [generic]
##### START NoBarCode
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 01 00 00 00 01 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 1C, ret 0
00 00 00 01 00 00 00 14
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 01 00 00 00 01 00 00 00 1C 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 00 00 01 00 00 00 14 01 00 00 0C 00 00 00 0C ................
00 00 00 00 00 00 00 00 00 00 00 00
##### START BarCode
BarCode : fd 5
Ident = [TSL-11000], function = [generic]
##### START NoBarCode
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 02 00 02 00 08 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 70, ret 0
00 02 00 08 00 00 00 68
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 02 00 02 00 08 00 00 00 70 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 02 00 08 00 00 00 68 02 00 00 0C 00 00 00 60 .......h........
00 02 09 00 00 00 00 00 00 00 00 00 00 03 09 00 ................
00 00 00 00 00 00 00 00 00 04 09 00 00 00 00 00 ................
00 00 00 00 00 05 09 00 00 00 00 00 00 00 00 00 ................
00 06 09 00 00 00 00 00 00 00 00 00 00 07 09 00 ................
00 00 00 00 00 00 00 00 00 08 09 00 00 00 00 00 ................
00 00 00 00 00 09 09 00 00 00 00 00 00 00 00 00 ................
##### START BarCode
BarCode : fd 5
Ident = [TSL-11000], function = [generic]
##### START NoBarCode
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 04 00 01 00 01 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 1C, ret 0
00 01 00 01 00 00 00 14
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 04 00 01 00 01 00 00 00 1C 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 01 00 01 00 00 00 14 04 00 00 0C 00 00 00 0C ................
00 01 08 00 00 00 30 0C 00 00 00 00
Media Transport Elements (robot arms) :
Element #0000 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 1 From = -001
TAG =
Storage Elements (Media slots) :
Element #0002 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0003 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0004 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0005 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0006 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0007 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0008 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0009 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Data Transfer Elements (tape drives) :
Element #0001 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 4 From = -001
TAG =
SCSI ADDRESS = 12
Import/Export Elements :
##### START get_clean_state
##### START GenericClean
##### START RequestSense
##### START DecodeSCSI
SCSI_ExecuteCommand : REQUEST SENSE 03 00 00 00 1D 00
##### STOP DecodeSCSI
GenericClean :
##### START DecodeExtSense
GenericClean : Extended Sense
##### START DecodeSense
GenericClean : Sense Keys
ErrorCode 70
Valid 0
ASC 00
ASCQ 00
Sense key 00
No Sense
Log Parameter Page Code 00
Log Parameter Code 00
Underrun/Overrun Counter 00
Read/Write Error Counter 0
Remaing 1024 byte tape blocks 0
Tracking Retry Counter 00
Read/Write Retry Counter 00
Fault Sympton Code 03
##### STOP get_clean_state [0]
##### START isempty
##### STOP isempty [0]
##### START get_clean_state
##### START GenericClean
##### START RequestSense
##### START DecodeSCSI
SCSI_ExecuteCommand : REQUEST SENSE 03 00 00 00 1D 00
##### STOP DecodeSCSI
GenericClean :
##### START DecodeExtSense
GenericClean : Extended Sense
##### START DecodeSense
GenericClean : Sense Keys
ErrorCode 70
Valid 0
ASC 00
ASCQ 00
Sense key 00
No Sense
Log Parameter Page Code 00
Log Parameter Code 00
Underrun/Overrun Counter 00
Read/Write Error Counter 0
Remaing 1024 byte tape blocks 0
Tracking Retry Counter 00
Read/Write Retry Counter 00
Fault Sympton Code 03
##### STOP get_clean_state [0]
###### START load
load : fd 5, drive 0, slot 1
load : load drive 0[1] slot 1[3]
##### START GenericMove
GenericMove : from = 3, to = 1
##### START LogSense
##### START SCSI_TestUnitReady
##### START DecodeSCSI
SCSI_ExecuteCommand : TEST UNIT READY 00 00 00 00 00 00
##### STOP DecodeSCSI
##### START GenericRewind
##### START DecodeSCSI
SCSI_ExecuteCommand : REWIND 01 01 00 00 00 00
##### STOP DecodeSCSI
##### START DecodeSense
GenericRewind : Sense Keys
ErrorCode 70
Valid 0
ASC 24
ASCQ 00
Sense key 05
Illegal Request
##### START SCSI_TestUnitReady
##### START DecodeSCSI
SCSI_ExecuteCommand : TEST UNIT READY 00 00 00 00 00 00
##### STOP DecodeSCSI
GenericRewind : Ready after 0 sec, true = 0
LogSense
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 40 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 47 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 6E 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 73 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START DecodeSCSI
SCSI_ExecuteCommand : LOG SENSE 4D 00 7E 00 00 00 00 08 00 00
##### STOP DecodeSCSI
##### START LookupElement
##### STOP LookupElement (STE)
##### START LookupElement
##### STOP LookupElement (DTE)
CheckMove : checking if move from 3 to 1 is legal
CheckMove : ST2DT
##### START SCSI_Move
##### START DecodeSCSI
SCSI_ExecuteCommand : MOVE MEDIUM A5 00 00 00 00 03 00 01 00 00 00 00
##### STOP DecodeSCSI
SCSI_Move : SCSI_ExecuteCommand = 0
##### START DecodeSense
SCSI_Move :Sense Keys
ErrorCode 00
Valid 0
ASC 00
ASCQ 00
Sense key 00
No Sense
SCSI_Move : end 0
##### START GenericElementStatus
##### START BarCode
BarCode : fd 5
Ident = [TSL-11000], function = [generic]
##### START NoBarCode
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 01 00 00 00 01 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 1C, ret 0
00 01 00 01 00 00 00 14
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 01 00 00 00 01 00 00 00 1C 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 01 00 01 00 00 00 14 04 00 00 0C 00 00 00 0C ................
00 01 08 00 00 00 30 0C 00 00 00 00
##### START BarCode
BarCode : fd 5
Ident = [TSL-11000], function = [generic]
##### START NoBarCode
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 02 00 02 00 08 00 00 00 08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength 1C, ret 0
00 01 00 01 00 00 00 14
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 02 00 02 00 08 00 00 00 1C 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 01 00 01 00 00 00 14 04 00 00 0C 00 00 00 0C ................
00 01 08 00 00 00 30 0C 00 00 00 00
##### START SenseHandler
Ident = [TSL-11000], function = [generic]
##### START GenericSenseHandler
##### START DecodeSense
GenericSenseHandler : Sense Keys
ErrorCode 04
Valid 0
ASC 45
ASCQ 00
Sense key 00
No Sense
GenericSenseHandler : Unknow 0 ASC = 45 ASCQ = 0
#### STOP SenseHandler
chg-scsi: pid 2594 finish time Thu Nov 16 14:36:17 2000
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST34501W Rev: 0015
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: EXABYTE Model: EXB-85058SQANXR0 Rev: 0808
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: EXABYTE Model: EXB-10e Rev: 1.9
Type: Medium Changer ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 12 Lun: 00
Vendor: SONY Model: TSL-11000 Rev: L100
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 12 Lun: 01
Vendor: SONY Model: TSL-11000 Rev: L100
Type: Medium Changer ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 14 Lun: 00
Vendor: EXABYTE Model: EXB-89008E000112 Rev: V39e
Type: Sequential-Access ANSI SCSI revision: 02
