Get the latest version of the chg-zd-mtx script, which will support the
version of MTX you are using
http://www.noc.isite.net/?Projects
On Fri, Feb 09, 2001 at 12:21:02PM -0500, Joseph Del Corso wrote:
> OK, I've gotten a little furthur thanks to the helpful suggestions
> of everyone.... but...
>
>
> Now I get the following amcheck error....
>
>
>
> Amanda Tape Server Host Check
> -----------------------------
> /opt/tmp: 34743148 KB disk space available, that's plenty.
> amcheck-server: could not get changer info: [: integer expression expected
> before -eq
>
> Amanda Backup Client Hosts Check
> --------------------------------
> Client check: 1 host checked in 0.036 seconds, 0 problems found.
>
> (brought to you by Amanda 2.4.1p1)
>
>
>
> I am using the following info in the amanda.conf file:
>
>
> runtapes 1 # number of tapes to be used in a single run of
> amdump
> tpchanger "chg-zd-mtx" # the tape-changer glue script
> #tapedev "/dev/sg4" # the no-rewind tape device to be used
> tapedev "/dev/st0" # the no-rewind tape device to be used
> #rawtapedev "/dev/sg5 # the raw device to be used (ftape only)
> changerfile "/var/lib/amanda/DailySet1/changer"
> #changerfile "/var/lib/amanda/DailySet1/changer-status"
> #changerfile "/etc/amanda/changer.conf"
> changerdev "/dev/sg3"
>
>
>
> I've also tried using tpchanger "chg-manual"
> and running, but I get the following:
>
> Amanda Tape Server Host Check
> -----------------------------
> /opt/tmp: 34743148 KB disk space available, that's plenty.
> insert tape into slot 0 and press return
>
> insert tape into slot 0 and press return
>
> insert tape into slot 0 and press return
>
> insert tape into slot 0 and press return
>
> insert tape into slot 0 and press return
>
>
> (Even though there is a tape in slot 0, I can hit return over and over,
> with no results but to get another "press return" message)
>
>
> I did get this message once:
>
> [operator@lycan amanda]$ amcheck DailySet1
> Amanda Tape Server Host Check
> -----------------------------
> /opt/tmp: 34743148 KB disk space available, that's plenty.
> amcheck-server: slot 0: reading label: Input/output error
> insert tape into slot 1 and press return
>
> insert tape into slot 1 and press return
>
>
>
>
> Thoughts?
>
>
> Joe
--
Joe Rhett Chief Technology Officer
[EMAIL PROTECTED] ISite Services, Inc.
PGP keys and contact information: http://www.noc.isite.net/Staff/
