It looks good! Though I believe you'll need to drop the
.conf off the changerfile entry, otherwise Amanda will look for
/etc/amanda/DailySet1/changer.conf.conf and not find it. As for
an example config file, there is one in the comments at the top
of the chg-zd-mtx script itself.
On Tuesday 26 June 2001 01:10 pm, you wrote:
> Thanks for the heads up. I couldn't find a example config file for
> chg-zd-mtx, is there one?
>
> Here is how amanda.conf is set, does this look correct then?
> runtapes 1 # number of tapes to be used in a single run of
> amdump tpchanger "chg-zd-mtx" # the tape-changer glue script
> tapedev "/dev/nst0" # the no-rewind tape device to be used
> rawtapedev "/dev/null" # the raw device to be used (ftape only)
> #changerfile "/var/lib/amanda/DailySet1/changer"
> #changerfile "/var/lib/amanda/DailySet1/changer-status"
> changerfile "/etc/amanda/DailySet1/changer.conf"
> changerdev "/dev/sg4"
>
> I have mtx installed. I can issue the following:
> # /sbin/mtx -f /dev/sg4 inquiry
> Product Type: Medium Changer
> Vendor ID: 'ADIC '
> Product ID: 'FastStor DLT '
> Revision: 'D116'
> Attached Changer: No
>
> # /sbin/mtx -f /dev/sg4 status
> Storage Changer /dev/sg4:1 Drives, 7 Slots ( 0 Import/Export )
> Data Transfer Element 0:Empty
> Storage Element 1:Full
> Storage Element 2:Full
> Storage Element 3:Full
> Storage Element 4:Full
> Storage Element 5:Full
> Storage Element 6:Empty
> Storage Element 7:Empty
--
------------------------------------------------------
Aaron Smith vox: 616.226.9550
Network Director fax: 616.349.9076
Nexcerpt, Inc. [EMAIL PROTECTED]
