thank's for your help Thomas !!!
How can i know if chg-scsi is running on my system ???
wish chg-???? do i need to use (chg-manual, chg-multi, chg-scsi)
i think it will be chg-scsi because my robot have a medium changer scsi id "0"
and the drive #1 is scsi id "1" and drive #2 is scsi id "2"
i'm i right or wrong ???
>OK, on solaris you don't have the sg device as on linux
i know....thank's
but do i need to use (compile sst(simple scsi target driver)) because i don't
have the /dev/sg* or /dev/rsst* stuff on my system
because when i try to use mtx (mtx1.2.13)
i received this :
./mtx -f /dev/rmt/2ln inquiry
Product Type: Tape Drive
Vendor ID: 'QUANTUM '
Product ID: 'DLT8000 '
Revision: '0114'
Attached Changer: No
and
./mtx -f /dev/rmt/2ln status
mtx: Request Sense: Long Report=yes
mtx: Request Sense: Valid Residual=no
mtx: Request Sense: Error Code=70 (Current)
mtx: Request Sense: Sense Key=Not Ready
mtx: Request Sense: FileMark=no
mtx: Request Sense: EOM=no
mtx: Request Sense: ILI=no
mtx: Request Sense: Additional Sense Code = 04
mtx: Request Sense: Additional Sense Qualifier = 00
mtx: Request Sense: BPV=no
mtx: Request Sense: Error in CDB=no
mtx: Request Sense: SKSV=no
READ ELEMENT STATUS Command Failed
Regards !!!
Eric
>Date: Mon, 10 Sep 2001 20:03:43 +0200
>From: Thomas Hepper <[EMAIL PROTECTED]>
>To: Eric Chamberland <[EMAIL PROTECTED]>
>Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
>Subject: Re: what files/scripts manage cleaning?
>Mime-Version: 1.0
>Content-Disposition: inline
>User-Agent: Mutt/1.2.5i
>
>Hi,
>On Mon, Sep 10, 2001 at 11:12:18AM -0400, Eric Chamberland wrote:
>[..]
>>
>> I'm on Solaris 7 and i have a Storedge L20 (robot) with DLT-8000 (Dlttape IV)
>> So i have one tape on /dev/rmt/1...
>> and the other tape on /dev/rmt/2...
>
>OK, on solaris you don't have the sg device as on linux. First question
>for me is, do you have chg-scsi running on your system ??.
>
>If yes you can try to set scsitapedev to /dev/rmt/1 and check what
>the debug files (/tmp/amanda/*) tells you about this device.
>
>If you get something like this:
>Try to open /dev/....
>done
>SCSI_OpenDevice : use SG interface
>SCSI_OpenDevice : current timeout 6000
>SCSI_OpenDevice : timeout set to 60000
>##### START SCSI_Inquiry
>SCSI_Inquiry start length = 56:
>##### START DecodeSCSI
>SCSI_ExecuteCommand : INQUIRY 12 00 00 00 38 00
>##### STOP DecodeSCSI
>08 80 02 02 33 00 00 00 45 58 41 42 59 54 45 20 ....3...EXABYTE.
>45 58 42 2D 32 31 30 20 20 20 20 20 20 20 20 20 EXB.210.........
>33 2E 31 31 33 2E 31 31 2E 30 31 33 20 20 20 20 3.113.11.013....
>20 20 20 20 20 20 20 01
>SCSI_Inquiry : end 0
>
>It should work...
>
>
> Thomas
>--
> -----------------------------------------------
> | Thomas Hepper [EMAIL PROTECTED] |
> | ( If the above address fail try ) |
> | ( [EMAIL PROTECTED]) |
> -----------------------------------------------
****************************************************
Eric Chamberland
Ingenieur de systemes
Centre de recherche du CHUL
2705 Blv laurier
Ste-Foy,Que
G1V 4G2
courriel: [EMAIL PROTECTED]
tel: (418) 656-4141 ext 6331
Fax: (418) 654-2761
