I've got 2 of the above 4 tape library machines, one here that works great, and one at work thats killing me.
I can take the exact same chg-scsi.conf and amanda.conf files to work, modifying only the sg# numbers in them because the work machine doesn't have a cd writer, so the changer then is sg1 instead of sg2. One thing that bothers me is that in chg-scsi.conf, I have scsitapedev defined as /dev/sg1, but at work it refuses to accept that when set for /dev/sg0 too. Immediately (10 seconds or so) after launching a run of amcheck, it echos a 'chg-scsi: got exit: 4 3 1 1' line. It never attempts to scan the magazine, nor actually report what tape is in the loaded slot, and goes on to report no other errors found. I could use some hand holding. These two drives, mine is near new, the work site one is about a year older I think, and this one loads the magazine, but not the first tape in it, that one cannot sit on the SEL SLOT report on its front panel without a tape being loaded. 2 different personalities without a doubt. -- Cheers, gene
