On Mon, Feb 25, 2002 at 12:17:23PM -0500, Joshua Baker-LePain wrote: > Date: Mon, 25 Feb 2002 12:17:23 -0500 (EST) > From: Joshua Baker-LePain <[EMAIL PROTECTED]> > To: Graham Dunn <[EMAIL PROTECTED]> > cc: [EMAIL PROTECTED] > Subject: Re: Strange failure to connect to client > > On Mon, 25 Feb 2002 at 12:06pm, Graham Dunn wrote > > > amcheck shows no errors, but the amdump log reports a problem... > > ideas? > > > > FAIL driver oshaberi /usr/local/mailman 0 20020225[could not connect > > to oshaberi] > > FAIL driver oshaberi ad0s1a 0 20020225[could not connect to oshaberi] > > INFO taper tape DailySet103 kb 320 fm 2 [OK] > > FINISH driver date 20020225 time 366.114 > > > > Amanda Backup Client Hosts Check > > -------------------------------- > > Client check: 3 hosts checked in 0.557 seconds, 0 problems found > > > Is there anything in /tmp/amanda/amanda*debug on oshaberi created at the > time of the amdump attempth? How about sendsize*debug?
Nothing in there... I'm getting a new error now: DISK planner oshaberi ad0s1a DISK planner oshaberi /usr/local/mailman START driver date 20020225 DISK planner axp500 da0a DISK planner tsuyoi ad0s1a START planner date 20020225 INFO planner Adding new disk oshaberi:ad0s1a. INFO planner Adding new disk oshaberi:/usr/local/mailman. FINISH planner date 20020225 STATS driver startup time 0.894 ERROR taper no-tape [new tape not found in rack] FAIL driver oshaberi /usr/local/mailman 20020225 0 [can't switch to incremental dump] FAIL driver oshaberi ad0s1a 20020225 0 [can't switch to incremental dump] SUCCESS dumper axp500 da0a 20020225 1 [sec 0.267 kb 160 kps 597.3 orig-kb 160] SUCCESS dumper tsuyoi ad0s1a 20020225 1 [sec 0.312 kb 130 kps 416.1 orig-kb 130]FINISH driver date 20020225 time 259.533 And I haven't changed anything in the amanda config (I know, I know, I don't believe that when my users say it either, but seriously) on the server or client. Looking through the FM, I see "can't switch to incremental mode" on a new filesystem usually means there's something wrong with the tape. Is this what the "[new tape not found in rack]" error is? There's no way the previous tapes are full and in contrast to my previous message, there's no INFO taper ... line at the end of this log (/usr/adm/amanda/DailySet1/log.20020225.3). Graham
