On Mon, Feb 25, 2002 at 10:00:36PM +0100, Ignacio Dosil Lago wrote: > Date: Mon, 25 Feb 2002 22:00:36 +0100 > From: Ignacio Dosil Lago <[EMAIL PROTECTED]> > To: Graham Dunn <[EMAIL PROTECTED]> > Cc: amanda-users <[EMAIL PROTECTED]> > Subject: Re: Strange failure to connect to client > > I�ve had problems with "dump" (don�t know why). Problems solved using "tar" > Try!
Unfortunately, I am using tar: oshaberi ad0s1a root-tar oshaberi /usr/local/mailman user-tar > > Graham Dunn wrote: > > >On Mon, Feb 25, 2002 at 12:17:23PM -0500, Joshua Baker-LePain wrote: > > > >>Date: Mon, 25 Feb 2002 12:17:23 -0500 (EST) > >>From: Joshua Baker-LePain <[EMAIL PROTECTED]> > >>To: Graham Dunn <[EMAIL PROTECTED]> > >>cc: [EMAIL PROTECTED] > >>Subject: Re: Strange failure to connect to client > >> > >>On Mon, 25 Feb 2002 at 12:06pm, Graham Dunn wrote > >> > >>>amcheck shows no errors, but the amdump log reports a problem... > >>>ideas? > >>> > >>>FAIL driver oshaberi /usr/local/mailman 0 20020225[could not connect > >>>to oshaberi] > >>>FAIL driver oshaberi ad0s1a 0 20020225[could not connect to oshaberi] > >>>INFO taper tape DailySet103 kb 320 fm 2 [OK] > >>>FINISH driver date 20020225 time 366.114 > >>> > >>>Amanda Backup Client Hosts Check > >>>-------------------------------- > >>>Client check: 3 hosts checked in 0.557 seconds, 0 problems found > >>> > >>Is there anything in /tmp/amanda/amanda*debug on oshaberi created at the > >>time of the amdump attempth? How about sendsize*debug? > >> > > > >Nothing in there... I'm getting a new error now: > > > >DISK planner oshaberi ad0s1a > >DISK planner oshaberi /usr/local/mailman > >START driver date 20020225 > >DISK planner axp500 da0a > >DISK planner tsuyoi ad0s1a > >START planner date 20020225 > >INFO planner Adding new disk oshaberi:ad0s1a. > >INFO planner Adding new disk oshaberi:/usr/local/mailman. > >FINISH planner date 20020225 > >STATS driver startup time 0.894 > >ERROR taper no-tape [new tape not found in rack] > >FAIL driver oshaberi /usr/local/mailman 20020225 0 [can't switch to > >incremental > >dump] > >FAIL driver oshaberi ad0s1a 20020225 0 [can't switch to incremental > >dump] > >SUCCESS dumper axp500 da0a 20020225 1 [sec 0.267 kb 160 kps 597.3 > >orig-kb 160] > >SUCCESS dumper tsuyoi ad0s1a 20020225 1 [sec 0.312 kb 130 kps 416.1 > >orig-kb 130]FINISH driver date 20020225 time 259.533 > > > >And I haven't changed anything in the amanda config (I know, I know, I > >don't believe that when my users say it either, but seriously) on the > >server or client. > > > >Looking through the FM, I see "can't switch to incremental mode" on a > >new filesystem usually means there's something wrong with the tape. Is > >this what the "[new tape not found in rack]" error is? > > > >There's no way the previous tapes are full and in contrast to my > >previous message, there's no INFO taper ... line at the end of this > >log (/usr/adm/amanda/DailySet1/log.20020225.3). > > > >Graham > > > >
