Hi Amanda-mailinglist,
I've tried everything I can think of, and I've also posted to this mailinglist
with my problem several times in the last few weeks, but I've been ignored.
I really hope you will help me, otherwise I'm forced to give up, as I have tried
everything I can think off.
I'm trying to backup a remote RedHat 7.2. I've installed the amanda-client under
xinetd, and it is allowed to connect - and I see no error messages on
the client.
I've tried to recompile amanda on the client - but there is no changes,
and I don't know what else to try. I don't have a tapestreamer (only an
80gb disk) so I really need to use the file: feature from the amanda
2.4.3 series - so I really can't change the server. I've tried amanda-2.4.2p4 on
the client, but I get the exact same error message.
Please, Please, Please help me.. I've tried to find the error for
several weeks now, but have had to give up :-(
It backs the localhost server up fine.
On the server I get this:
START driver date 20020617
DISK planner compaq.vsen.dk /www
DISK planner compaq.vsen.dk /etc
START planner date 20020617
INFO planner Adding new disk compaq.vsen.dk:/www.
INFO planner Adding new disk compaq.vsen.dk:/etc.
START taper datestamp 20020617 label DiskBackup11 tape 0
FINISH planner date 20020617
STATS driver startup time 23.103
FAIL taper compaq.vsen.dk /etc 20020617 0 [input: can't open: �S^F: No
such file or direc
tory]
FAIL driver compaq.vsen.dk /etc 20020617 0 [dump to tape failed]
FAIL taper compaq.vsen.dk /www 20020617 0 [input: can't open: �S^F: No
such file or direc
tory]
FAIL driver compaq.vsen.dk /www 20020617 0 [dump to tape failed]
INFO taper tape DiskBackup11 kb 0 fm 2 [OK]
FINISH driver date 20020617 time 401.325
DiskBackup/log.20020617.3 lines 1-15/15 (END)
and then I grabbed this from the amdump file which looks weird to me
too..
driver: result time 797.683 from taper: TAPER-OK
driver: dumping compaq.vsen.dk:/ directly to tape
driver: send-cmd time 797.684 to taper: PORT-WRITE 00-00001
compaq.vsen.dk / 0 20020617
taper: try_socksize: receive buffer size is 65536
taper: bind_portrange: port 577: Permission denied
taper: stream_server: waiting for connection: 0.0.0.0.34583
driver: result time 797.684 from taper: PORT 34583
driver: send-cmd time 797.684 to dumper0: PORT-DUMP 01-00002 34583
compaq.vsen.dk / NODEVICE 0 1970:1:1:0:0:0 GNUTAR |;bsd-auth;index;
driver: state time 797.684 free kps: 10970 space: 296960 taper: writing
idle-dumpers: 3
qlen tapeq: 0 runq: 0 roomq: 0 wakeup: 86400 driver-idle: not-idle
driver: interface-state time 797.684 if : free 5970 if ETH0: free 4000
if LOCAL: free 1000
driver: hdisk-state time 797.684 hdisk 0: free 296960 dumpers 0
dumper: stream_client: connected to 127.0.0.1.34583
dumper: stream_client: our side is 0.0.0.0.34584
dumper: try_socksize: send buffer size is 65536
taper: stream_accept: connection from 127.0.0.1.34584
taper: try_socksize: receive buffer size is 32768
dumper: stream_client: connect(1685) failed: Connection timed out
taper: reader-side: got label DiskBackup11 filenum 1
driver: result time 988.044 from dumper0: TRY-AGAIN 01-00002 [could not
connect to data
port: Connection timed out]
driver: result time 988.044 from taper: TAPE-ERROR 00-00001 [input:
can't open: 674S^F:
No such file or directory]
my disklist looks like this:
compaq.vsen.dk /www always-full
compaq.vsen.dk /etc always-full
I also tried just / - same results.
--
Regards,
Klavs Klavsen
-------------| This mail has been sent to you by: |------------
Klavs Klavsen - Open Source Consultant
[EMAIL PROTECTED] - http://www.vsen.dk
Get PGP key from www.keyserver.net - Key ID: 0x586D5BCA
Fingerprint = A95E B57B 3CE0 9131 9D15 94DA E1CD 641E 586D 5BCA
--------------------[ I believe that... ]-----------------------
It is a myth that people resist change. People resist what other
people make them do, not what they themselves choose to do...
That's why companies that innovate successfully year after year
seek their peopl's ideas, let them initiate new projects and
encourage more experiments. -- Rosabeth Moss Kanter
