On Wednesday 11 September 2002 12:50, Quinn, Richard C. - Collinsville IT wrote: >E: Working with multiple tape drives----- Ammended >Date: Wed, 11 Sep 2002 11:50:51 -0500 From: "Quinn, Richard C. - Collinsville IT" > <[EMAIL PROTECTED]> To: "Gene Heskett" > <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]> > >Yes, > >my box is a Sparc E-450 running Sol 6. > >I am using the SST driver for Solaris 6. > >I think it(SST Driver) is the predecessor to Solaris' sgen driver > for Sol 7 and 8. > >Here are the boot messages for the Jukebox robotic arm and its 2 > QUANTUM drives > >Sep 4 12:30:12 sun1 unix: sst3: found Changer device at > tgt0, lun0 >Sep 4 12:30:12 sun1 unix: sst3: Vendor/Product ID = STK > 9730 Sep 4 12:30:12 sun1 unix: sst3 at pci1000,f7: >Sep 4 12:30:12 sun1 unix: target 0 lun 0 >Sep 4 12:30:12 sun1 unix: sst3 is /pci@1f,4000/scsi@4,1/sst@0,0
And try as I might, includeing hilighting the cmplete message, there is something in the listing that prevents me from quoting it all. The bottom line is that for this, I think you are going to need the manuals on this device. Its entirely possible it has a problem. I find it different in that it finds the robot at address 0, and the two drives at address 1 and 2. But properly set in amanda.conf and chg-scsi.conf, I don't believe that to be a problem. You may have to either take it to a winderz box and check it with their software, or return it to the vendor with your impression of the problem. -- Cheers, Gene AMD K6-III@500mhz 320M Athlon1600XP@1400mhz 512M 99.15% setiathome rank, not too shabby for a WV hillbilly
