Hello I am configuring amanda-2.4.2p2-9 for a changer HP Ultrium LTO 1 (composed of 6 slots) and I have the following problem : the tape in the next slot is not automatically loaded
The main lines of the configuration files are the following : ====== amanda.conf runtapes 6 tpchanger "chg-multi" changerfile "/etc/amanda/DailySet1/chg-multi.conf" ====== chg-multi.conf multieject 0 gravity 1 needeject 1 ejectdelay 0 statefile /var/lib/amanda/csd/changer-status firstslot 1 lastslot 6 slot 1 /dev/nst0 slot 2 /dev/nst0 slot 3 /dev/nst0 slot 4 /dev/nst0 slot 5 /dev/nst0 slot 6 /dev/nst0 The system configuration is a Linux Redhat 8.0 with kernel 2.4.18-14smp Here is the description of the problem : - I manually load a tape in the slot 1, it's ok - Then, I lauch amdump, it's ok - But when the first backup is finished, if I lauch a second amdump, I get the error : "ERROR taper no-tape [new tape not found in rack]" I use chg-multi as tpchanger, which is a very basic interface to the changer, as I didn't found a better "driver", and my changer seems to react like a non wrap around changer : when the last position is reached, I have to manually put the changer on the first position. Thanks in advance Anne Facq -- Anne Facq System Engineer CRPP - Centre de Recherche Paul Pascal France Mail : [EMAIL PROTECTED] Phone : 05 56 84 56 62 Fax : 05 56 84 56 00 http://www.crpp.u-bordeaux.fr
