> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Monday, October 11, 2004 9:27 AM > To: [EMAIL PROTECTED] > Subject: Problems with Overland Library and Solaris 8 > > The "chg-zd-mtx.conf" looks like this: > > --- SNIP > > firstslot=0 > lastslot=9 > cleanslot=10 > > --- SNAP
There I have firstslot=1 lastslot=11 cleanslot=11 but it's RedHat 9. Maybe it is different under solaris. > The "disklist" looks like this: > > --- SNIP > > A /dev/sda5 always-full # 1.5G > A /dev/sda6 always-full # 224M > A /dev/sda8 always-full # 355M > > # EDVSERV > B /dev/sdb6 always-full # 2.1G > B /dev/sda5 always-full # 376M > B /dev/sda6 always-full # 3.2G > B /dev/sda7 always-full # 1.6G > B /dev/sda8 always-full # 28G > B /dev/sda9 always-full # 76G > B /dev/sda10 always-full # 3.6G > > --- SNAP > > This means a total capacity for backup of round about 117G. > I thought, 2 tapes (specified in runtapes) should be enough and > amanda would change the needed tapes automatically. That's wrong. Amanda don't change needed tapes automatically. If there is a 110 GB-dump to write to a 100GB-Tape, it won't work. So you must use two DLE. I use two configs to write to different tapes. Maybe there are hints to do it more clever. > Anyone any ideas??? Thanks in advance. HTH Greetings Bernd
