Hi, Jason, on Dienstag, 28. September 2004 at 22:18 you wrote to amanda-users:
JM> Ok I got it, I was making it way too hard again. Re-read the manual's triple JM> checked the configs, folders, permissions and rebooted the server and JM> everything is working now. Figured out there was two things incorrect in my JM> setup and they were. FreeBSD has to have operator:operator not amanda:disk JM> for permissions over the amanda client to allow it to properly read so I JM> redid the port with the default permissions and just set the server and it JM> worked right off the bat after doing the second part. Found a write up JM> showing me there are some directories and files that are not created using JM> the port as well that I had to make and set permissions on. So for those JM> that have a problem with it here is the link for FreeBSD 4.9 port install JM> write up and how to fix it. JM> Http://lists.freebsd.org/pipermail/freebsd-ports-bugs/2003-November/018025.h JM> tml This link is dead right now ... Would be great if you could write a short note about what you had to do to fix your problem with AMANDA on FreeBSD, so I can add it to the system.notes in the AMANDA-docs. Just send it to me offline ... Thanks. -- best regards, Stefan Stefan G. Weichinger mailto:[EMAIL PROTECTED]
