#Congratulations on a successful amdump!
Wow, tell you what I am so happy to see those words! Thanks much!
By the time I saw your reply, I had impatiently split my single DLE into 9 DLEs
which also includes the last one for excluding all 8 DLEs on the top.
I did see same message again in the amdump summary :
taper: Will request retry of failed split part.
taper: tape TEST-1 kb 9845830 fm 15 [OK]
taper: tape TEST-2 kb 6661060 fm 7 [OK]
But now that I read your reply, I think it just doesn't mean a lot as long as I
see OK below that particular message. Here is full DUMP summary :
These dumps were to tapes TEST-1, TEST-2.
The next 6 tapes Amanda expects to use are: 6 new tapes.
The next 6 new tapes already labelled are: TEST-3, TEST-4, TEST-5, TEST-6,
TEST-7, TEST-8
STATISTICS:
Total Full Incr.
-------- -------- --------
Estimate Time (hrs:min) 0:10
Run Time (hrs:min) 1:51
Dump Time (hrs:min) 1:38 1:38 0:00
Output Size (meg) 16120.0 16120.0 0.0
Original Size (meg) 30661.6 30661.6 0.0
Avg Compressed Size (%) 52.6 52.6 --
Filesystems Dumped 9 9 0
Avg Dump Rate (k/s) 2809.3 2809.3 --
Tape Time (hrs:min) 0:17 0:17 0:00
Tape Size (meg) 16120.0 16120.0 0.0
Tape Used (%) 157.4 157.4 0.0
Filesystems Taped 9 9 0
Parts Taped 22 22 0
Avg Tp Write Rate (k/s) 16506.9 16506.9 --
USAGE BY TAPE:
Label Time Size % Nb Nc
TEST-1 0:10 10485219k 100.0 8 15
TEST-2 0:07 6661060k 63.5 2 7
NOTES:
planner: Adding new disk TEST.domain.com:/bk/location/./apple2007.
planner: Adding new disk TEST.domain.com:/bk/location/./apple2008.
planner: Adding new disk TEST.domain.com:/bk/location/./apple2009.
planner: Adding new disk TEST.domain.com:/bk/location/./apple2010.
planner: Adding new disk TEST.domain.com:/bk/location/./pear2008.
planner: Adding new disk TEST.domain.com:/bk/location/./pear2009.
planner: Adding new disk TEST.domain.com:/bk/location/./pear2010.
planner: Adding new disk TEST.domain.com:/bk/location/./other.
planner: Adding new disk TEST.domain.com:/bk/location/./_rest_.
taper: Will request retry of failed split part.
taper: tape TEST-1 kb 9845830 fm 15 [OK]
taper: tape TEST-2 kb 6661060 fm 7 [OK]
big estimate: TEST.domain.com /bk/location/./apple2007 0
est: 244128k out 119306k
big estimate: TEST.domain.com /bk/location/./apple2009 0
est: 834272k out 521751k
big estimate: TEST.domain.com /bk/location/./apple2010 0
est: 3646880k out 2857940k
DUMP SUMMARY:
DUMPER STATS TAPER STATS
HOSTNAME DISK L ORIG-kB OUT-kB COMP% MMM:SS KB/s MMM:SS KB/s
-------------------------- ------------------------------------- --------------
TEST.domain.co -u/./_rest_ 0 2981200 2155287 72.3 7:25 4838.8 2:05
17242.3
TEST.domain.co -./apple2007 0 488140 119306 24.4 1:40 1188.0 0:06
19884.3
TEST.domain.co -./apple2008 0 6484400 3803120 58.7 28:08 2253.5 4:23
14460.5
TEST.domain.co -./apple2009 0 1668440 521751 31.3 3:17 2642.9 0:29
17991.4
TEST.domain.co -./apple2010 0 7308970 2857940 39.1 22:30 2117.1 2:46
17216.5
TEST.domain.co -tu/./other 0 5833440 3828839 65.6 18:01 3542.5 3:44
17093.0
TEST.domain.co -pear2008 0 88010 46283 52.6 0:23 2040.3 0:02 23141.5
TEST.domain.co -pear2009 0 4127930 1932585 46.8 9:16 3475.2 1:53 17102.5
TEST.domain.co -pear2010 0 2416990 1241776 51.4 7:15 2853.0 1:12 17246.9
(brought to you by Amanda version 3.1.1)
Now I am thinking about, removing runtapes option completely, and add
splitdisk_buffer option to the holding disk, I am confused about one thing, why
you mentioned that "looks like your splits are about 0.5GB. " I have actually
set tape_splitsize = 1Gb although I do have fallback_splitsize = 512MB . Do you
mean I should grow this value to a higher value or you said that about
tape_splitsize value?
Other than this, your explanation was really informative and thanks again for
that.
+----------------------------------------------------------------------
|This was sent by [email protected] via Backup Central.
|Forward SPAM to [email protected].
+----------------------------------------------------------------------
