On Tue, Nov 10, 2015 at 9:39 AM, David Simpson <[email protected]> wrote: > I notice use-slots is set to 1-12... is that because you have both LHS and > RHS tape magazines?
Yes. I actually run 16 tapes, but 4 are for a different job. > > I'll probably try to leave the profiler going for the HP LTO6 on Friday > before going home. That's probably the best idea, since I'm sure the specs for LTO6 will differ some. Kind regards, Chris > > -----Original Message----- > From: Chris Nighswonger [mailto:[email protected]] > Sent: 10 November 2015 14:03 > To: David Simpson <[email protected]> > Cc: Amanda Users <[email protected]> > Subject: Re: Quantum Superloader 3 - configuration > > Hi David, > > We run a Superloader 3 with an LTO4 drive. Here are some snips from my > amanda.conf: > > define tapetype LTO-4 { > length 794405408 kbytes > filemark 1385 kbytes > speed 77291 kps > blocksize 32 kbytes > } > > define changer Quantum-Superloader3-LTO-V4 { > tapedev "chg-robot:/dev/sg3" > property "use-slots" "1-12" > property "tape-device" "0=tape:/dev/st0" > device-property "LEOM" "TRUE" > } > > This is running on Ubuntu 13.04. > > I ended up using amtapetype due to not being able to locate a tape > definition. Someday I'll add it to the wiki. > > Kind regards, > Chris > > > Christopher Nighswonger > Faculty Member > Network & Systems Director > Foundations Bible College & Seminary > www.foundations.edu > www.fbcradio.org > ------------- > NOTICE: The information contained in this electronic mail message is intended > only for the use of the intended recipient, and may also be protected by the > Electronic Communications Privacy Act, 18 USC Sections 2510-2521. If the > reader of this message is not the intended recipient, you are hereby notified > that any dissemination, distribution or copying of this communication is > strictly prohibited. > If you have received this communication in error, please reply to the sender, > and delete the original message. Thank you. > > > On Tue, Nov 10, 2015 at 8:41 AM, David Simpson <[email protected]> > wrote: >> Hi, >> >> Does anyone have configuration for a Quantum Superloader 3 they would >> be willing to share? >> >> I’m currently trying to use it with PERC5e and Centos 7. This is >> proving a crash course for me in tape and Amanda! (first time with >> both) >> >> In Amanda.conf I have the following plumbed in: >> >> changerdev "/dev/sg3" >> >> tapedev "/dev/nst0" >> >> I can write to a tape, but I’m not sure I have defined changer dev >> correctly though. I’ve only got two HP LTO6 tapes to play with right >> now, I’m looking to verify that Amanda can change to the next tape >> (with no human >> intervention) when it sees fit. >> >> I’m also going to try getting the profile of this HP LTO6 tape as I’ve >> not found a definition for it. >> >> thanks >> David >> >> -------------------- >> David Simpson - Computing Support Officer IBME - Institute of >> Biomedical Engineering Old Road Campus Research Building Oxford, OX3 >> 7DQ >> Tel: 01865 617697 ext: 17697 >> >>
