On Fri, Apr 15, 2016 at 10:21 AM, Jean-Louis Martineau <
jmartin...@carbonite.com> wrote:
> Which version of amanda are you using?
>
3.3.3 (on Ubuntu 14.04.4 LTS)
> Any other error message in the report?
>
none
What is the setting of max-dle-by-volume?
>
>
amgetconf CONFIG max-dle-by-volume
>
backup@scriptor:~/campus$ amgetconf campus max-dle-by-volume
1000000000
> post the taper debug file and the amdump.[x] file
>
There's a lot of stuff to sanitize in those files before posting here, but
here are most likely the relevant lines from the taper debug file:
Thu Apr 14 22:15:16 2016: thd-0x21e5050: taper: Building type SPLIT_FILE
header of 32768-32768 bytes with name='some_client' disk='/path/to/data'
dumplevel=1 and blocksize=32768
Thu Apr 14 22:15:16 2016: thd-0x21e5050: taper: warning: Got EIO on
/dev/st0, assuming end of tape
Thu Apr 14 22:15:16 2016: thd-0x21e5050: taper: Device tape:/dev/st0 error
= 'No space left on device'
Thu Apr 14 22:15:16 2016: thd-0x21e5050: taper: Device tape:/dev/st0
setting status flag(s): DEVICE_STATUS_VOLUME_ERROR
Thu Apr 14 22:15:27 2016: thd-0xf98c00: taper: Will request retry of failed
split part.
Thu Apr 14 22:15:27 2016: thd-0xf98c00: taper: tape campus-NGH873L4 kb 0 fm
1 [OK]
So this is a new Quantum Superloader, I can't imagine the heads are dirty
already.
Here is the tapetype as suggested by amtapetype:
define tapetype LTO-4 {
comment "Created by amtapetype; compression enabled"
length 794405408 kbytes
filemark 1385 kbytes
speed 77291 kps
blocksize 32 kbytes
}
The size of this backup job does not exceed 400GB at its largest size.
Kind regards,
Chris
-----------------------
These dumps were to tape campus-NGH873L4.
Not using all tapes because 1 tapes filled; runtapes=1 does not allow
additional tapes.
There are 112130560k of dumps left in the holding disk.
They will be flushed on the next run.
...
Tape Time (hrs:min) 0:00 0:00 0:00
Tape Size (meg) 0.0 0.0 0.0
Tape Used (%) 0.0 0.0 0.0
DLEs Taped 1 0 1 1:1
Parts Taped 1 0 1 1:1
Avg Tp Write Rate (k/s) 0.0 -- 0.0
USAGE BY TAPE:
Label Time Size % DLEs Parts
campus-NGH873L4 0:00 32k 0.0 1 1
-------------------------
I'm trying to figure out how a LTO4 tape was filled up by 32k of data....
> or am I missing something here?
>
> Amanda was doing this last week, so I loaded blank tapes and started the
> cycle fresh.
>
> Here is the contents of tapelist for this backup:
>
> 20160414221501 campus-NGH873L4 reuse BARCODE:NGH873L4 BLOCKSIZE:32
> 20160413221501 campus-NGH872L4 reuse BARCODE:NGH872L4 BLOCKSIZE:32
> 20160412221501 campus-NGH871L4 reuse BARCODE:NGH871L4 BLOCKSIZE:32
> 20160411221501 campus-NGH870L4 reuse BARCODE:NGH870L4 BLOCKSIZE:32
> 20160408221501 campus-NGH869L4 reuse BARCODE:NGH869L4 BLOCKSIZE:32
> 20160406222549 campus-NGH863L4 reuse BARCODE:NGH863L4 BLOCKSIZE:32
> 0 campus-NGH862L4 reuse BARCODE:NGH862L4 BLOCKSIZE:32
> 0 campus-NGH861L4 reuse BARCODE:NGH861L4 BLOCKSIZE:32
> 0 campus-NGH876L4 reuse BARCODE:NGH876L4 BLOCKSIZE:32
> 0 campus-NGH875L4 reuse BARCODE:NGH875L4 BLOCKSIZE:32
> 0 campus-NGH874L4 reuse BARCODE:NGH874L4 BLOCKSIZE:32
> 0 campus-NGH864L4 reuse BARCODE:NGH864L4 BLOCKSIZE:32
> 0 campus-NGH865L4 reuse BARCODE:NGH865L4 BLOCKSIZE:32
>
>
> Kind regards,
> Chris
>
>
>
