Greetings all; Amanda is very nearly hung, I think because of a hardware problem.
This particular mount of my rpi4 of /dev/sda1, a 240GB SSD on a usb-3<->sata adaptor, mounted as /media/pi/workspace has been going read-only when the only activity reading it has been amanda doing backups. It is not noted by mount as being ro at the moment, but htop says its /bin/tar status is D which is an uninterruptable disk sleep. And has been for over 3 hours dmesg on the pi is being spammed at short intervals by this: [36695.600650] sd 0:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD IN [36695.600663] sd 0:0:0:0: [sda] tag#1 CDB: opcode=0x28 28 00 18 c9 29 e0 00 00 08 00 [36695.640639] scsi host0: uas_eh_device_reset_handler start [36695.792704] usb 2-2: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd [36695.832619] scsi host0: uas_eh_device_reset_handler success I have not had any actual problems with the SSD's, but I have had one of the adaptor cables fail. Does this smell like another adaptor is dying? If so, its the 5th one. This is beginning to resemble the Prolific story. In which case I need to figure out where to buy a dependable adapter cable. Suggestions purchased, as this one is already a replacement of one no-name by another no-name. In service for about a month and I have no more spares on site. Thanks. Expert opinions welcomed. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene>
