Yes, I was also thinking about installing 3.5.1; I installed 3.5.2 from
RPM so I thought it was ok (I was reinstalling an old server wich ran
3.3.9).
I tried your suggestion and if I run amdump for each DLE, the dumps are ok
El 18/1/2023 a las 06:23, Stefan G. Weichinger escribió:
Am 18.01.23 um 01:47 schrieb Pablo Venini:
Hi Stefan, sorry for the delay in answering. This is a backup of the
amanda server itself (configs, etc.), there is less than 100MB of
information. What worries me is that if I use a holding disk without
correcting the problem the dumps will go there instead of going to
the vtapes.
Did you also test this config with amanda-3.5.1? 3.5.2 is rather
untested, I think, as there are still no official packages available
afaik.
I would define a small holding disk and see if that helps ... just for
debug purposes. A vtape-setup also benefits from a holding disk, no
reason to not use that with virtual tapes.
What if you only dump specific DLEs?
amdump myconf /etc