On Fri, July 6, 2007 19:06, MrC wrote: > I use $log_level=2, and have for sometime.
okay i have now tested with this aswell here >> and is default log_templ used ? > amavis-logwatch matches against the default log_templ. default in amavisd perl and default in amavisd.conf dont match, i have used the default from a old amavisd.conf > On my ToDo list is to support modifications to log_templ, but will require > a significant amount of work; it also places additional requirements on > the logwatch project. yes i can see the bennefit to just log whats are needed in amavisd-logwatch, as it is now to much logged that in the end just go to dev-null > I may fork the project and implement log_templ formats, but I > still need to investigate. okay >> amavisd-logwatch only shows sa tags when log level 3 is used, but this is >> imho overkill :-) > Yes, level 3 is quite verbose, and is not nessasary. Again, I use level > 2. Check your syslog configuration as well. I have three simultaneous > amavis logs, one at the default log level, and two at levels 2, one > using syslog INFO and one DEBUG. problem here was not syslog, but amavisd logs diffrent then what is in amavisd.conf for the log_templ >> if log_templ is defined in amavisd.conf the sa tags is shown in log level 0 > log_templ is defined in the amavisd code itself - this is where the > default log_templ comes from. Perhaps amavis is modified in your > installation? nope, amavisd.conf have here commented $log_templ so the default from amavisd is still used >> so my question is how to get the best results out of it ? > Here are my settings in amavisd.conf > > $log_level = 2; # verbosity 0..5, -d > $syslog_facility = 'local5'; # Syslog facility as a string > > and in syslog.conf: > > local5.notice -/var/log/amavisd.log > local5.info -/var/log/amavisd-info.log > local5.debug -/var/log/amavisd-debug.log > > > At these settings, you should see lines in your logs such as: > > ... SPAM, <[EMAIL PROTECTED]> -> <[EMAIL PROTECTED]>, Yes, score=7.196 tag=x > tag2=6.2 kill=6.9 tests=[AWL=-1.862, BAYES_60=1, DKIM_POLICY_SIGNSOME=0, > HTML_MESSAGE=0.001, MIME_HTML_ONLY=1.457, RAZOR2_CF_RANGE_51_100=2, > RAZOR2_CF_RANGE_E4_51_100=1.5, RAZOR2_CHECK=3, RDNS_DYNAMIC=0.1], > autolearn=no, quarantine xxx(spam-quarantine) > > or SPAM-TAG lines when your tag level is low enough. Do you have such > entries ? If not, perhaps show your various tag and quarantine related > settings. yes i have now >> my testing olso change how Mailgraph works here, just will try to awoid it > I'm not sure I understand what you mean here, in terms of relevance to > the above? mailgraph olso use the default log_templ i hope, my concern is to not change so it makes mailgraph not working when amavisd-logwatch does -- ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ AMaViS-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/amavis-user AMaViS-FAQ:http://www.amavis.org/amavis-faq.php3 AMaViS-HowTos:http://www.amavis.org/howto/
