On Mon, 2025-08-04 at 11:56 -0400, Alex Deucher wrote:
> On Thu, Jul 31, 2025 at 5:58 AM Timur Kristóf
> <timur.kris...@gmail.com> wrote:
> >
> > Adjust the nominal (and performance) clocks for DCE 8-10,
> > and set them to 625 MHz, which is the value used by the legacy
> > display code in amdgpu_atombios_get_clock_info.
> >
> > This was tested with Hawaii, Tonga and Fiji.
> > These GPUs can output 4K 60Hz (10-bit depth) at 625 MHz.
> >
> > The extra 15% clock was added as a workaround for a Polaris issue
> > which uses DCE 11, and should not have been used on DCE 8-10 which
> > are already hardcoded to the highest possible display clock.
> > Unfortunately, the extra 15% was mistakenly copied and kept
> > even on code paths which don't affect Polaris.
> >
> > This commit fixes that and also adds a check to make sure
> > not to exceed the maximum DCE 8-10 display clock.
> >
> > Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for
> > Polaris")
> > Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific")
> > Signed-off-by: Timur Kristóf <timur.kris...@gmail.com>
> >
> > x
>
> Stray x here. with that fixed:
> Acked-by: Alex Deucher <alexander.deuc...@amd.com>
Thanks!
Sorry about that, that's a typo that I made during a rebase.
Maybe a silly question but what is the right way to deal with it?
Should I send the entire series or just the patch with the typo fixed?
Or can you just delete the typo when you are applying it to your tree?
Timur
>
> > ---
> > .../drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c | 12 +++++---
> > ----
> > 1 file changed, 5 insertions(+), 7 deletions(-)
> >
> > diff --git
> > a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> > b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> > index 26feefbb8990..69e9540f553b 100644
> > --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> > +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> > @@ -72,9 +72,9 @@ static const struct state_dependent_clocks
> > dce80_max_clks_by_state[] = {
> > /* ClocksStateLow */
> > { .display_clk_khz = 352000, .pixel_clk_khz = 330000},
> > /* ClocksStateNominal */
> > -{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 },
> > +{ .display_clk_khz = 625000, .pixel_clk_khz = 400000 },
> > /* ClocksStatePerformance */
> > -{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 } };
> > +{ .display_clk_khz = 625000, .pixel_clk_khz = 400000 } };
> >
> > int dentist_get_divider_from_did(int did)
> > {
> > @@ -400,11 +400,9 @@ static void dce_update_clocks(struct clk_mgr
> > *clk_mgr_base,
> > {
> > struct clk_mgr_internal *clk_mgr_dce =
> > TO_CLK_MGR_INTERNAL(clk_mgr_base);
> > struct dm_pp_power_level_change_request level_change_req;
> > - int patched_disp_clk = context->bw_ctx.bw.dce.dispclk_khz;
> > -
> > - /*TODO: W/A for dal3 linux, investigate why this works */
> > - if (!clk_mgr_dce->dfs_bypass_active)
> > - patched_disp_clk = patched_disp_clk * 115 / 100;
> > + const int max_disp_clk =
> > + clk_mgr_dce-
> > >max_clks_by_state[DM_PP_CLOCKS_STATE_PERFORMANCE].display_clk_khz;
> > + int patched_disp_clk = MIN(max_disp_clk, context-
> > >bw_ctx.bw.dce.dispclk_khz);
> >
> > level_change_req.power_level =
> > dce_get_required_clocks_state(clk_mgr_base, context);
> > /* get max clock state from PPLIB */
> > --
> > 2.50.1
> >
