On Thu, Jun 11, 2026 at 01:57:15PM +0800, Jiqian Chen wrote:
> For Renior APU with gfx9, in some test scenarios with disabling
> ring_reset, like accessing an unmapped invalid address, it can
> trigger a gpu job timeout event, then driver uses Mode2 reset
> to reset GPU, but after Mode2 compute Ring test and IB test fail
> randomly. It because the CPC and CPF are still stuck after Mode2,
> that causes compute Ring test fail. What's more, the HQDs of
> MECs are still active, that causes MECs use stale HQDs when MECs
> are unhalted before driver restore MQDs, then causes compute IB
> tests fail.
>
> So, add sequences to reset CPC and CPF after Mode2, and de-active
> HQDs of MECs before unhalting MECs.
>
> Signed-off-by: Jiqian Chen <[email protected]>
> ---
> v1->v2 changes:
> * Move my sequences into a new function gfx_v9_0_cp_mode2_clear_state
> * Add reset Mode2 method check to the if condition that call my sequences
>
> v1:
> Hi all,
>
> My board is Renior APU with gfx9, smu12. I run a testcase that
> accesses an invalid address to trigger a amdgpu_job_timedout()
> with disabling ring_reset, so that driver will call mode2 reset
> directly. After mode2 reset I found compute Ring tests and compute
> IB tests fail randomly on random compute ring.
>
> We checked the scan dump of GPU, we can see the CPC and CPF are
> still stuck, that caused Compute Ring tests fail.
>
> I added printings in driver codes (gfx_v9_0_cp_resume), and found
> the HQDs of MECs are still active, that may cause MECs use stale
> HQDs when MECs are unhalted before mapping compute queues (restoring
> MQDs to HQDs).
>
> So, I send this patch to fix above problems.
> There are two main changes of my patch:
> One is to reset CPC and CPF before resuming KCQ.
> Another is to disable HQDs beofre unhalting MECs.
> ---
> drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 44 +++++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> index 47721d0c3781..d3ef45aa299a 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
> @@ -3942,6 +3942,46 @@ static int gfx_v9_0_kcq_resume(struct amdgpu_device
> *adev)
> return amdgpu_gfx_enable_kcq(adev, 0);
> }
>
> +static void gfx_v9_0_cp_mode2_clear_state(struct amdgpu_device *adev)
> +{
> + u32 tmp;
> + int i, j, k;
> +
> + /*
> + * CPC and CPF are still stuck after Mode2 reset, that causes later
> + * compute ring test fail and then loop Mode2 reset infinitely
> + */
> + tmp = RREG32_SOC15(GC, 0, mmGRBM_SOFT_RESET);
> + tmp = REG_SET_FIELD(tmp, GRBM_SOFT_RESET, SOFT_RESET_CPC, 1);
> + tmp = REG_SET_FIELD(tmp, GRBM_SOFT_RESET, SOFT_RESET_CPF, 1);
> + WREG32_SOC15(GC, 0, mmGRBM_SOFT_RESET, tmp);
> + tmp = RREG32_SOC15(GC, 0, mmGRBM_SOFT_RESET);
> + udelay(50);
> +
> + tmp &= ~(GRBM_SOFT_RESET__SOFT_RESET_CPC_MASK |
> + GRBM_SOFT_RESET__SOFT_RESET_CPF_MASK);
> + WREG32_SOC15(GC, 0, mmGRBM_SOFT_RESET, tmp);
> + tmp = RREG32_SOC15(GC, 0, mmGRBM_SOFT_RESET);
> + udelay(50);
> +
> + /*
> + * CP_HQD_ACTIVE survives Mode2 reset. Deactivate every MEC HQD to
> + * prevent MEC use stale HQD when MEC unhalted before restoring MQD.
> + * Otherwise, later compute IB test may fail
> + */
> + for (i = 0; i < adev->gfx.mec.num_mec; i++) {
> + for (j = 0; j < adev->gfx.mec.num_pipe_per_mec; j++) {
> + for (k = 0; k < adev->gfx.mec.num_queue_per_pipe; k++) {
> + mutex_lock(&adev->srbm_mutex);
> + soc15_grbm_select(adev, i + 1, j, k, 0, 0);
> + WREG32_SOC15_RLC(GC, 0, mmCP_HQD_ACTIVE, 0);
I think we don't need to use WREG32_SOC15_RLC here, because SRIOV GPU won't
access this code path.
> + soc15_grbm_select(adev, 0, 0, 0, 0, 0);
> + mutex_unlock(&adev->srbm_mutex);
> + }
> + }
> + }
> +}
> +
> static int gfx_v9_0_cp_resume(struct amdgpu_device *adev)
> {
> int r, i;
> @@ -3967,6 +4007,10 @@ static int gfx_v9_0_cp_resume(struct amdgpu_device
> *adev)
> gfx_v9_0_cp_gfx_enable(adev, false);
> gfx_v9_0_cp_compute_enable(adev, false);
>
> + if ((adev->flags & AMD_IS_APU) && amdgpu_in_reset(adev) &&
> + amdgpu_asic_reset_method(adev) == AMD_RESET_METHOD_MODE2)
If we constrain the condition to a mode2 reset, does that mean we no longer
need to restrict it to APU?
Thanks,
Ray
> + gfx_v9_0_cp_mode2_clear_state(adev);
> +
> r = gfx_v9_0_kiq_resume(adev);
> if (r)
> return r;
> --
> 2.39.5
>
