On Fri, 29 May 2015, Matthias Trute wrote:
> I think avra is a dead horse, not even a zombie any more. I tried > naken_asm, but could not make it work with amforth on the avr. The > msp430 works fine with it. Believe me, I tried hard to get it working > for both. > C'est la vie. Well I got amforth building ok on a ubuntu 14.04 vm and also under cygwin. Cygwin lacks an easy path forward for avrdude but everything else worked fine. Anyone else tried cygwin? I didn't try installing wine in cygwin :-). I did use the avrasm2.exe distro from sourceforge which was handy and I programed using avrstudio 6.1. I think the applications makefiles for butterfly and arduino uno are a bit out of date, at least the 5.5 release I was working on had me making changes, more than just turning off wine. If I find another block of time should I work from trunk and post diffs or just send Matthius files? I'm not much of a programmer so I want to go back and double check this comment. Sadly I don't know if the shells work as I am on the road and thought I could power my butterfly from USB but it is not quite enough voltage to provide a full 3.3 v over the LM7833 so the serial ports is a little flaky. I spent a lot of time looking at baud rates and fuses when what I really had was a noisy serial line. AVR studio reports only 2.6v on the device which doesn't seem to be enough for 8mhz nor decent serial line behaviour. Ian ------------------------------------------------------------------------------ _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
