Hello Tristan, welcome to the club :-)
Tristan Williams writes: > Hello, > > I have only recently found AmForth, and have, over the last month or > so, been making led flash, getting the time from rtc, displaying > things on an lcd etc. It really has been a most enjoyable and > educational couple of months for me. I thank Matthias and the AmForth > developers for making AmForth available. I wish I had found it > earlier. > > I want to put my Arduino uno to some practical use and so wish to > implement a turnkey solution. To some extent I have done this as the > code I've written below runs on powering up the uno, turns on the led > and then I can connect via a serial connection to the interpreter. > > Is this the/a correct way to set up a turnkey solution? Is there a > better way? > > Initially I tried the Cookbook code example > > http://amforth.sourceforge.net/TG/recipes/Turnkey.html > > but I could not get it to work. Uploading the code onto a freshly > flashed uno would result in a hanging interpreter, requiring > re-flashing. I would be very grateful for any pointers as to what I am > doing wrong. > > Many thanks, > Tristan > > \ turnkey example > > #include avr-values.frt > #include is.frt > #include ms.frt > #include defers.frt > > $24 constant DDRB > $25 constant PORTB > > 1 5 lshift constant uno.led > > ' turnkey defer@ Evalue tk.amforth > > : tk.custom > > tk.amforth execute > > 1000 ms > > \ init and set high uno led on pin 13 > > uno.led DDRB c@ or DDRB c! > uno.led PORTB c@ or PORTB c! > ; > > ' tk.custom is turnkey You need to call the original content of turnkey, too. Something like : tk.custom applturnkey \ your code goes here ; ' tk.custom is turnkey The code of "applturnkey" resides in .../words/applturnkey.asm in the template application directory. Cheers, Erich > > \ end turnkey example > > ------------------------------------------------------------------------------ > What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic > patterns at an interface-level. Reveals which users, apps, and protocols are > consuming the most bandwidth. Provides multi-vendor support for NetFlow, > J-Flow, sFlow and other flows. Make informed decisions using capacity planning > reports. http://pubads.g.doubleclick.net/gampad/clk?id=1444514421&iu=/41014381 > _______________________________________________ > Amforth-devel mailing list for http://amforth.sf.net/ > Amforth-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/amforth-devel -- The purpose of computing is insight --- not numbers R. Hamming ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. http://pubads.g.doubleclick.net/gampad/clk?id=1444514421&iu=/41014381 _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel
