I dont know what to say. Ive been using AB for maybe 5+ yrs now. Ive created
and renamed God knows how many watchlists. I've followed the steps in the video
you sent. The results were and are still the same as I have stated previously.
I see how it is supposed to work,but that is not what is happening on my end. I
edit the name as shown. When I hit enter (in the categories window ) the name
WILL change. I click on the OK button to close the cat. window. If I then go
back ,(menu>symbol>categories>watchlists), the name displayed is the OLD name
not the NEW name.
If ,while doing this,I have the symbol tab open on the left, when I edit the
name in categories, the name in the list under the symbol tab on the left will
NOT change.
If I try to edit there instead of in the categories window, I will highlight
and edit and the name WILL change. When I hit the enter key, the name will
IMMEDIATELY revert back to the original name.
(I'm using caps for emphasis, I'm not yelling at you).
Also,the screenshot you mentioned is not visable.
As I said,I may not be as computer savvy as a lot of people, but I've been
using your product for years. I've been creating and renaming watchlists for
years with no problems.I appreciate your patience in helping me find a solution
to this. -jim
--- In [email protected], Tomasz Janeczko <gro...@...> wrote:
>
> Hello,
>
> 1. The screenshot below shows the View menu as of version 5.30 where
> Quarterly and Yearly options *do* exist:
>
>
>
>
>
>
> 2. Here is a video that shows how to rename watch list:
> http://www.amibroker.com/video/WatchListRename.html
>
>
> Best regards,
> Tomasz Janeczko
> amibroker.com
>
> On 2010-07-27 23:36, triangle702000 wrote:
> >
> > Sorry Tomasz, I reset all menus to their default, still no quarterly or
> > yearly options to be found. I should of added that in my previous reply. It
> > restored a ton of buttons that I had previously hidden ,including intraday
> > and hourly buttons but no qtry and yrly.
> >
> > When attempting to edit a watchlist whether from the symbol tab on the left
> > ,or menu- symbol>categories the result is the same. If I take the menu -
> > symbol>categories>watchlist route,it will allow me to edit, I hit the enter
> > key and the new name is showing in the categories window. If I close the
> > window and then go back to it, the new name is gone and the original name
> > is back again.
> >
> > If I attempt to edit in the tree, when I hit enter,the name immediately
> > changes back to the original name.
> >
> > --- In [email protected], Tomasz Janeczko<groups@> wrote:
> >> Hello,
> >>
> >> In windows when you are editing any list view or tree view item in-place
> >> you should press ENTER (RETURN) key on the keyboard
> >> to accept edit.
> >>
> >> Plus you don't read what I told you earlier. You should RESET MENUS to
> >> default state (Tools->Customize, press "RESET"button) if you don't have
> >> certain items.
> >>
> >> Best regards,
> >> Tomasz Janeczko
> >> amibroker.com
> >>
> >> On 2010-07-27 03:07, triangle702000 wrote:
> >>>
> >>> Followed Symbol>Categories>Watchlist> edit name. Hit OK. Categories
> >>> window closes. Click on symbol tab on the left of the screen. The name of
> >>> the list I just edited is back to the original name. Go back to
> >>> categories and its back to the original name there too.
> >>>
> >>> I can find no mention of yearly or quarterly anywhere except in the
> >>> tutorial.
> >>>
> >>> I have v5.30.4, build date july 23,2010.
> >>>
> >>> I'm starting to think there was a problem with the download of the new
> >>> version. I originally thought that I was just overlooking something but
> >>> it seems I have parts of the new version missing or something.
> >>>
> >>> Anyone else have any suggestions ,or am I better off just getting in
> >>> touch with support?
> >>>
> >>>
> >>> --- In [email protected], "Anthony Faragasso"<ajf1111@> wrote:
> >>>> to change watchlist name...go to Symbol>Categories>Watchlist> edit name
> >>>>
> >>>> I have the latest version of the software...if I go to View menu....I
> >>>> have Daily, Weekly, Monthly, Quarterly, and Yearly...
> >>>>
> >>>>
> >>>> ----- Original Message -----
> >>>> From: triangle702000
> >>>> To: [email protected]
> >>>> Sent: Monday, July 26, 2010 6:52 PM
> >>>> Subject: [amibroker] Re: questions about recent upgrade
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> After some playing ,I can create a watchlist by clicking on the
> >>>> symbol tab @ the left of the screen and then right clicking and
> >>>> selecting "create...", still doesn't work when clicking on "symbol" in
> >>>> the menu bar @ the top. I can live with that.
> >>>>
> >>>> Another issue is when trying to rename a watchlist,I click to
> >>>> highlight in blue, click again and a rectangle appears around the name
> >>>> of the watchlist with the blinking cursor next to it. I type in the new
> >>>> name but when I hit enter the new name disappears and is replaced with
> >>>> the original name. If I try to create a new watchlist with the new
> >>>> name,it says a watchlist already exists with that name even though the
> >>>> original name is displayed in the tree.
> >>>>
> >>>> example- I attempt to change "original" to "new". I click twice,type
> >>>> in "new", hit enter and the word "new" disappears and it says "original"
> >>>> again. Now,if I try to create a new watchlist and name it "new",it says
> >>>> there is already a list named "new" even though the list it is referring
> >>>> to is displayed as " original" in the tree.I never had this problem in
> >>>> the previous version.
> >>>>
> >>>> Also,I dont see any way to view charts in a yearly and quarterly
> >>>> time frame. The only options available are
> >>>> intraday,hourly,daily,weekly,and monthly. I've reset all the menus,and
> >>>> still no yr or qt.
> >>>>
> >>>> Also,I use Yahoo finance for data. Is there any place that provides
> >>>> hourly,15min etc. data for free. I understand that to view this in real
> >>>> time I need a subscription but I was curious if there was anywhere I
> >>>> could get this data at the end of the day.
> >>>>
> >>>> Thanks -jim
> >>>>
> >>>
> >>>
> >>> ------------------------------------
> >>>
> >>> **** IMPORTANT PLEASE READ ****
> >>> This group is for the discussion between users only.
> >>> This is *NOT* technical support channel.
> >>>
> >>> TO GET TECHNICAL SUPPORT send an e-mail directly to
> >>> SUPPORT {at} amibroker.com
> >>>
> >>> TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> >>> http://www.amibroker.com/feedback/
> >>> (submissions sent via other channels won't be considered)
> >>>
> >>> For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> >>> http://www.amibroker.com/devlog/
> >>>
> >>> Yahoo! Groups Links
> >>>
> >>>
> >>>
> >>>
> >
> >
> >
> > ------------------------------------
> >
> > **** IMPORTANT PLEASE READ ****
> > This group is for the discussion between users only.
> > This is *NOT* technical support channel.
> >
> > TO GET TECHNICAL SUPPORT send an e-mail directly to
> > SUPPORT {at} amibroker.com
> >
> > TO SUBMIT SUGGESTIONS please use FEEDBACK CENTER at
> > http://www.amibroker.com/feedback/
> > (submissions sent via other channels won't be considered)
> >
> > For NEW RELEASE ANNOUNCEMENTS and other news always check DEVLOG:
> > http://www.amibroker.com/devlog/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
