Hi Mike,
If it is the primary of the transformer that opened (usually is) you can
still use it to get you buy. Just put a resistor in the plate of the
audio driver tube, in place of the transformer primary. I think around
10k 2 watt will work ok. Then couple the plate of the driver to the grid
of one of the 1625s with a capacitor. Leave the secondary of the driver
transformer hooked to both grids and bias as it was.
It will work as an auto transformer to couple audio into both tubes.
Works fine! Although gain will be somewhat less than with the transformer.
Be sure to check to see what shorted to take out the transformer. Maybe
the tube.
73
Gary K4FMX
MIke Wells wrote:
Hello,
I just lost the audio driver xfmr in my DX-100. I turned it on to warm up
and a few minutes later the house filled with the familiar smell. Anyone
have a parts unit or advise as where I might find a replacement?
Thanks
Mike
W0FD
_______________________________________________
AMRadio mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/amradio
