How do you reduce the drive for AM? I take it that is how you operate CW?

73
Gary  K4FMX


James M. Walker wrote:
Hum,
4-1000A G.G. amplifier, 3000 VDC plate, 700 MA Plate I, 500 MA
Grid I, with 125 Watts out of DX-100 running apprx 2100 W input and
dissipating 670 watts plate = approximately 1430 watts output!

While the carrier level into 50 ohm dummy load is 1400 watts measured
and a really NICE orange glow! This is with a 200 cfm blower, air system
socket and chimney.

Jim
WB2FCN

----- Original Message -----
From: "Jim candela" <[EMAIL PROTECTED]>
To: "Discussion of AM Radio" <[email protected]>
Sent: Wednesday, January 12, 2005 7:07 PM
Subject: RE: [AMRadio] AM Amps



Darrell,

That amp you built with the 4-1000 was a "killer" in more ways than one!
Time for a confession..

Regards,
Jim
WD5JKO

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Darrell, WA5VGO
Sent: Tuesday, January 11, 2005 6:04 PM
To: Discussion of AM Radio
Subject: Re: [AMRadio] AM Amps


At 04:21 PM 1/11/2005 -0500, you wrote:


In a message dated 1/11/05 12:14:43 PM, [EMAIL PROTECTED] writes:



well all I can say is it works.. works well as a matter of fact, and

has

been for 6 years :)
I typically run between 350 and 400 watts of carrier every day. It

looks

great on the scope. Modulation envelope is perfect. 100% modulation.

In

6

years Ive only lost one tube, and I accidently broke that one.



I have to agree with Gary.   You're seeing 1600 watts PEP and 400W of

carrier

OUT with a pair of GG 813s???   Does not compute!   Just curious, are you
talking about 400W INPUT power to the linear under carrier only condx
maybe?   If
so, this would work out to about 133W carrier OUT and each 813

dissipating

about 133W which would make more sense.

Dennis D. W7QHO
Glendale, CA


I'm with Dennis and Gary. To run a linear amplifier at 375 watts of

carrier

and 100% modulation, you will need around 800 watts of plate dissipation.
For a short time a number of years ago, I tried running an AF-68 and a
4-1000A linear amplifier. I could never get more than around 450 watts of
carrier and stay linear............I didn't need a heater in the shack
either.

73,
Darrell, WA5VGO



73,
Darrell, WA5VGO




______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.10 - Release Date: 1/10/2005

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.11 - Release Date: 1/12/2005

______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]




______________________________________________________________
AMRadio mailing list
Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]





Reply via email to