Got to be CW, RTTY, etc. With AM you would either melt the tube down or
splatter all over the band.
73,
Darrell, WA5VGO
At 04:49 PM 1/13/2005 -0500, you wrote:
How do you reduce the drive for AM? I take it that is how you operate CW?
73
Gary K4FMX
James M. Walker wrote:
Hum,
4-1000A G.G. amplifier, 3000 VDC plate, 700 MA Plate I, 500 MA
Grid I, with 125 Watts out of DX-100 running apprx 2100 W input and
dissipating 670 watts plate = approximately 1430 watts output!
While the carrier level into 50 ohm dummy load is 1400 watts measured
and a really NICE orange glow! This is with a 200 cfm blower, air system
socket and chimney.
Jim
WB2FCN
