Brian, Have you decided against a solid state relay? I'd like to try one of those to see if it will solve a high current relay sticking problem I'm having.
Anyone on here used a SS relay in a high current position? Did it hold up? 73', KA5MIR On Friday 01 December 2006 10:59, A.R.S. - W5AMI wrote: > I am using an old relay from a BC-610 to apply primary voltage > (110vac) to a HV transformer in my rig. I would like to replace this > with a vacuum relay or something similar. The contacts need to carry > about 25 amps on each pole, one for the final supply, and one for the > modulator plates on a separate HV transformer. Have any of you bc-610 > owners done this upgrade? If so, can you recommend a good relay for > this? Prefer one with a 110 volt coil. > > Thanks. > Brian / w5ami ______________________________________________________________ AMRadio mailing list List Home: http://mailman.qth.net/mailman/listinfo/amradio Partner Website: http://www.amfone.net Help: http://mailman.qth.net/mmfaq.html Post: mailto:[email protected]
