Brian have you considered using a solid state relay? Omron
makes some, check the Mouser catalog. No contact arcing,
and some have internal snubbers. Otherwise a contactor
available from a local electrical supply house might work.
Jim
W5JO
I am using an old relay from a BC-610 to apply primary
voltage
(110vac) to a HV transformer in my rig. I would like to
replace this
with a vacuum relay or something similar. The contacts
need to carry
about 25 amps on each pole, one for the final supply, and
one for the
modulator plates on a separate HV transformer. Have any
of you bc-610
owners done this upgrade? If so, can you recommend a good
relay for
this? Prefer one with a 110 volt coil.
Thanks.
Brian / w5ami
______________________________________________________________
AMRadio mailing list
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Partner Website: http://www.amfone.net
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
