Thanks for you help Jim. I think something is not correct in the tank
circuit. I'm going to take some time
and do some very thorough investigating.
Thanks for your help.
George KE4HJ
Jim Wilhite wrote:
George if you continue to have problems, verify the wiring of L2
against the manual. Someone may have installed it incorrectly. L2
(pictured at the bottom right of the schematic has four connections.
One or more may be in the wrong place.
Jim/W5JO
There's actually two antenna inputs. One marked "doublets" and the
other marked "antenna".
It makes no difference which input I try, I get the same results.
Except when using the long wire.
Then I can get it to load using either imput.
I think the switch your remembering is the one that selects outboard
VFO or xtal.
George KE4HJ
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
