They plug pin to pin into the same socket but what is your application? For
starters the filament current is higher in the 6L6. At the same B+ voltage
they can be driven to higher plate current also.
Carl
KM1H
----- Original Message -----
From: "Bob Peters" <[EMAIL PROTECTED]>
To: "AM" <[email protected]>
Sent: Wednesday, February 13, 2008 3:42 PM
Subject: [AMRadio] 6V6 vs. 6L6
Hi guys...Is the 6V6 and 6L6 interchangeable??? Small question HI!!
Very Best 73's
Bob W1PE
The Voice of Mesquite
www.w1pe.com
"Money is only temporary, but radios are forever" - Jim Little aka "the
old dog"/K5BAI
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://www.mail-archive.com/[email protected]/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
______________________________________________________________
Our Main Website: http://www.amfone.net
AMRadio mailing list
Searchable Archives: http://www.mail-archive.com/[email protected]/
List Rules (must read!): http://w5ami.net/amradiofaq.html
List Home: http://mailman.qth.net/mailman/listinfo/amradio
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:[email protected]
To unsubscribe, send an email to [EMAIL PROTECTED] with
the word unsubscribe in the message body.
