I should add that I'm using the following pin number connection: KPC: As you look at the connector on the rear panel, it goes 5 4 3 2 1 9 8 7 6
TS-2000: As you look at the connector on the rear panel, it goes: 13 9 10 11 12 5 6 7 8 1 2 3 4 On Sun, Apr 25, 2010 at 2:51 PM, Nathaniel S. Parsons <[email protected]> wrote: > Hi everyone, > > Thanks for the help with our 4800 bps issue. We haven't found a > solution yet, but we're working on it, and I'll let you know when we > have something figured out. > > Just now, I found a Kantronics KPC-9612+ lying around the lab, and > would like to fire it up with our TS-2000 to see if it's still in > working order. Can someone check to see if I've figured out the pinout > correctly? I'll put the KPC pins on the left, and the TS-2000 pins on > the right. > > 1 (Audio out) - 11 (Mic in) > 2 (Carrier detect) - 5,7 (Main/sub squelch) > 3 (PTT) - 9 (PTT) > 4 (CTRLB) - Not connected > 5 (RXA) - 1,3 (Main/sub out) > 6 (GND) - Any of 4,8,12 (GND) > 7 (Ext-In) - Not connected > 8 (CTRLA) - Not connected > 9 (GND) - Any of 4,8,12 (GND) > > TS-2000 pins not connected: 2,6,10,13 > > Thanks, > Nate KC2SVI > _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
