I shore you know that the ts 2000 has a built in tnc that do most of the task of the kpc12 nick
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark L. Hammond Sent: Monday, April 26, 2010 12:39 PM To: Nathaniel S. Parsons Cc: AMSAT-BB Subject: [amsat-bb] Re: KPC-9612+ with TS-2000 Hello Nate, While I can't comment on the specific TNC hookup---please remember to carefully check the MENU settings on the TS-2000. Pay special attention to settings about baud (9600), etc. For example: 50E MAIN 50F 9600 There may be others, but look over the menus carefully. There are LOTS of things you can set in the radio--it's very handy! 73, Mark N8MH On Sun, Apr 25, 2010 at 2:56 PM, Nathaniel S. Parsons <[email protected]> wrote: > I should add that I'm using the following pin number connection: > > KPC: As you look at the connector on the rear panel, it goes > 5 4 3 2 1 > 9 8 7 6 > > TS-2000: As you look at the connector on the rear panel, it goes: > 13 > 9 10 11 12 > 5 6 7 8 > 1 2 3 4 > > On Sun, Apr 25, 2010 at 2:51 PM, Nathaniel S. Parsons <[email protected]> wrote: >> Hi everyone, >> >> Thanks for the help with our 4800 bps issue. We haven't found a >> solution yet, but we're working on it, and I'll let you know when we >> have something figured out. >> >> Just now, I found a Kantronics KPC-9612+ lying around the lab, and >> would like to fire it up with our TS-2000 to see if it's still in >> working order. Can someone check to see if I've figured out the pinout >> correctly? I'll put the KPC pins on the left, and the TS-2000 pins on >> the right. >> >> 1 (Audio out) - 11 (Mic in) >> 2 (Carrier detect) - 5,7 (Main/sub squelch) >> 3 (PTT) - 9 (PTT) >> 4 (CTRLB) - Not connected >> 5 (RXA) - 1,3 (Main/sub out) >> 6 (GND) - Any of 4,8,12 (GND) >> 7 (Ext-In) - Not connected >> 8 (CTRLA) - Not connected >> 9 (GND) - Any of 4,8,12 (GND) >> >> TS-2000 pins not connected: 2,6,10,13 >> >> Thanks, >> Nate KC2SVI >> > _______________________________________________ > Sent via [email protected]. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > -- Mark L. Hammond [N8MH] _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
