It works fine. Used a TS2000E via a MX2000 tri-plexer to a co-linear both u/v and v/u with no problems. Worked the States and Canada this way via F0-29.
Also used a Create CLP5130 log periodic connected in the same way. Just keep the TX power as low as is needed to hear your own signal and no more. David G8OQW ******** -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of PA3GUO Sent: 09 June 2010 20:36 To: [email protected] Subject: [amsat-bb] Re: TS2000 on dualband antenna (for sat work) Hi John Let me try tomorrow and report back, I have never tested this. Henk, PA3GUO Has anyone on the list tried using a Kenwood TS2000 on full duplex satellite operatation using a dualband VHF/UHF antenna and a diplexer? Is it possible or is there too much desensitization thru the diplexer to make full duplex work? 73s John AA5JG _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
