Hi Keith, It's apparently setup to use hardware modems. This shack loves hardware TNCs :)
You might be able to get AWGPE working if you can send KISS data out to a virtual com port...check out http://www.soundcardpacket.org/ "In addition, Tim Pearson KB9VQF has written a <http://www.pearsoncomputing.net/freeware.php>AGWPE Serial Loopback utility that creates virtual serial ports that will let you link AGWPE to any packet program that can link to a KISS-enabled TNC (AGWPE's sound card mode simulates a KISS TNC). " 73, Mark N8MH At 09:04 AM 9/30/2012 -0700, Keith O'Brien wrote: >The F1 Telemetry Decoder Manual in Section 5.2.3 Decode Data OBC2 >*You should connect this program with your transceiver first. > >Not sure what they are looking for here. I would like to use AGW Packet Engine >as my packet TNC. Anyone offer any guidance in how to configure APWPE to the >F1 decoder program ? I also have MixW if that would work... > >Keith N4ZQ > > >_______________________________________________ >Sent via [email protected]. Opinions expressed are those of the author. >Not an AMSAT-NA member? Join now to support the amateur satellite program! >Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
