On 12/11/13 3:25 AM, Stefan Wagener wrote:
Yes,
It could work as long as software for doppler control (eg SatPc32) can
invoke the smaller frequency changes which it actually can (see my other
note on the IC-9100). So you would use the built-in DSTAR module for uplink
or downlink and the 9600 packet mode with a GMSK node adapter for the other
in a full duple radio like the IC-9100. Or you use two radios in 9600
packet mode with 2 node adapters for uplink and downlink as long as they
are supported via doppler software and small frequency steps.
I think setups using GMSK modems or a DV-RPTR board and an all mode
radio with Doppler correction will have the most success on satellite
D-STAR, because computer Doppler compensation and the small tuning step
size will keep everything within tolerance. Time to pull my DV-RPTR
board out and hook it up to the IC-7000. :)
--
73 de Tony VK3JED/VK3IRL
http://vkradio.com
_______________________________________________
Sent via [email protected]. Opinions expressed are those of the author.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
