Good idea about the cut and paste of the errors. I should have done that
in the first place. Apologies.
-----
Code ----------------------------------------------------------------------
----
/*@@@@@ Modification by Avila */
if (op -> outopts.outstyle == "HTML")
{
if (rebuild == TRUE)
{
rebuild_files();
}
}
/*@@@@@ End of Modification */
-----
Error ---------------------------------------------------------------------
----
--------------------Configuration: Makefile - Win32
Debug--------------------
Compiling...
analog.c
d:\taa\log\programs\analog\source\analog.c(113) : warning C4047: '==' :
'int ' differs in levels of indirection from 'char [5]'
rebuild.c
d:\taa\log\programs\analog\source\rebuild.c(70) : warning C4047: '=' : 'int
' differs in levels of indirection from 'char *'
d:\taa\log\programs\analog\source\rebuild.c(78) : warning C4047: '=' : 'int
' differs in levels of indirection from 'char *'
d:\taa\log\programs\analog\source\rebuild.c(79) : error C2061: syntax error
: identifier 'result'
d:\taa\log\programs\analog\source\rebuild.c(79) : error C2059: syntax error
: ')'
Error executing cl.exe.
Analog.exe - 2 error(s), 3 warning(s)
-----
Comments ------------------------------------------------------------------
----
When I click on the first error it points to
if (op -> outopts.outstyle == "HTML")
When I use HTML or OUT_HTML in place of "HTML" I get additional errors.
The second error is in my code which I have not got back to to correct.
result = strstr(recordin, "</BODY>" );
It doesn't like that and I have to change the syntax.
FYI: char recordin[25000];
THANKS for the patience and help. Just a reminder. Your code looks like
UNIX code and this is Win32. Any chance that is the problem? C is
supposed to be C but there might be a slight difference. Just a thought.
And remember that I am VERY rusty on my C so anything is possible. If it
looks bad to you it probably is bad!
Again, THANKS.
Mike
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of alex
> Sent: Monday, January 04, 1999 5:42 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [analog-help] Re:
>
>
> hmm. the syntax i gave you should be fine on the left as well. here's
> what i did:
>
> if (op -> outopts.outstyle != OUT_NONE)
> output(&(op -> outopts), op -> gooditems, op -> baditems, &(op ->
> dman),
> op -> sizes, op -> miscopts.data, op -> miscopts.bytes,
> op -> miscopts.bytes7, op -> miscopts.granularity);
> /* test code */
> if (op -> outopts.outstyle == HTML)
> fprintf(stderr, "congrats\n");
> /* end test code */
> my_exit(EXIT_SUCCESS);
> return(EXIT_SUCCESS); /* just to stop compiler complaining */
>
> which gave me this:
> cgi2:/usr/public/packages/analog > ./analog +C'OUTPUT HTML' > /dev/null
> ./analog: Warning F: Failed to open logfile
> /export/home/webmastr/server-root/document-root/logs/access_log:
> ignoring it
> (For help on all errors and warnings, see docs/errors.html)
> ./analog: Warning R: Turning off empty Request Report
> ./analog: Warning R: Turning off empty Directory Report
> ./analog: Warning R: Turning off empty Referrer Report
> ./analog: Warning R: Turning off empty Referring Site Report
> congrats
> cgi2:/usr/public/packages/analog >
>
> so it dereferenced "outstyle" fine and recognized the HTML choice to
> print my cheesy "congrats" message. if it's not working then either i'm
> misunderstanding your problem or the problem isn't with that line.
> either way, a cut-and-paste of the errors you're getting would help.
>
>
> alex
>
> Mike Avila wrote:
> >
> > The problem is the left side, not the right side of the if-test. The
> > compiler does not like the redirection. My C is too rusty to
> figure out
> > how to "re-engineer" the pointer format to make it work.
> >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED]]On Behalf Of alex
> > > Sent: Sunday, January 03, 1999 3:14 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: [analog-help] Re:
> > >
> > >
> > > try:
> > > if (op -> outopts.outstyle == HTML)
> > >
> > > (without your quotation marks). HTML is defined in analhea2.h along
> > > with ASCII and OUT_NONE.
> > >
> > >
> > > alex
> > >
> > > Mike Avila wrote:
> > > >
> > > > A few days ago I sent this request for help to the author
> but have not
> > > > received a response yet. He is probably still in the
> moving process or
> > > > maybe analog-author is not working. Is there anybody who
> has seen the
> > > > source code for analog.c that can help me? It is at the end
> > > of analog.c
> > > > that I am trying to add the following code.
> > > >
> > > > Thanks.
> > > >
> > > >
> > > -----------------------------------------------------------------
> > > ----------
> > > > ------
> > > >
> > > > I am having a problem trying to get compare to the output
> type so I can
> > > > know whether or not to execute the module I created. Would
> > > you please help
> > > > me by providing the correct code to check the output type for HTML.
> > > >
> > > > /*@@@@@ Modification by Avila */
> > > > if (op -> outopts.outstyle == "HTML") <<<<<<<<<<<<<<<<<<<<<<<<<<
> > > > {
> > > > if (rebuild == TRUE)
> > > > {
> > > > rebuild_files();
> > > > }
> > > > }
> > > > /*@@@@@ End of Modification */
> > > > my_exit(EXIT_SUCCESS);
> > > > return(EXIT_SUCCESS); /* just to stop compiler complaining */
> > > >
> > > > Thanks. I appreciate the help. I cannot figure this one out
> > > by myself.
> >
> > --------------------------------------------------------------------
> > This is the analog-help mailing list. To unsubscribe from this
> > mailing list, send mail to [EMAIL PROTECTED]
> > with "unsubscribe analog-help" in the main BODY OF THE MESSAGE.
> > --------------------------------------------------------------------
>
> --
> GeoCities Operations
> _____________________________________
> --------------------------------------------------------------------
> This is the analog-help mailing list. To unsubscribe from this
> mailing list, send mail to [EMAIL PROTECTED]
> with "unsubscribe analog-help" in the main BODY OF THE MESSAGE.
> --------------------------------------------------------------------
>
--------------------------------------------------------------------
This is the analog-help mailing list. To unsubscribe from this
mailing list, send mail to [EMAIL PROTECTED]
with "unsubscribe analog-help" in the main BODY OF THE MESSAGE.
--------------------------------------------------------------------
