No, just the img files (including kernel.img). Don't replace the other kernels in the installer.
The install takes several minutes. If it hasn't completed in 10 minutes or so, I'd probably start over. Jim On Sun, Aug 2, 2009 at 9:46 PM, bluestar8783<[email protected]> wrote: > Hi, Jim: > > You mean I just copy these *.img file and kernel file(uImage, > uImage.bin > and /boot/uImage-GTA02.bin), not including qi.img, into 1st partition(vfat) > on > SD-Card, it will auto-install, right? > > How long do I need to wait? I am afraid I feel the system hang on. > > Thanks for your help. > Regard, > Alan > 2009/8/2 Jim Ancona <[email protected]> >> >> I think the instructions on the wiki no longer apply since Koolu >> changed the install procedure in beta 4. >> >> If you are working from the current Koolu tree, after a build look in >> out/target/product/freerunner where you will find kernel.img, >> ramdisk.img, system.img and userdata.img. Just copy those four files >> over the versions in the Koolu install on your SD card, and reinstall >> the same way you installed beta 7. You should now be running your >> customized image. >> >> If someone can tell me how to update the kernel ramdis and system >> images without overwring the user file system I'd appreciate it. I >> hate loosing all my installed apps and settings every time I >> reinstall. >> >> Jim >> >> On Sat, Aug 1, 2009 at 9:42 PM, bluestar8783<[email protected]> >> wrote: >> > Hi, >> > >> > I already booted my customized kernel by putting in SD card and use >> > Qi. >> > >> > NOW I tried to flash my customized rootfs, but always hang on Koolu >> > logo. >> > My steps are below: >> > >> > 1. flash "Koolu Beta 7 Release" into FR-GTA02, and it works >> > well >> > 2. git source code(koolu-1.0 or capcake) from Koolu, add my >> > drivers >> > and rebuild for customized kernel >> > 3. only put kernel file on SD card(ext3 partition) and boot >> > from >> > Qi, it works well. >> > >> > 4. create jffs2 file by following >> > http://wiki.openmoko.org/wiki/Android_porting >> > #Building_the_Koolu_Android_Source and flash it, but hang >> > on >> > Koolu logo >> > 5. also replaced all img files of "Koolu Beta 7 Release", and >> > boot >> > from >> > SD card, but it still failed. >> > >> > Could anyone tell me how to flash customized rootfs successfully? >> > Thanks for your BIG BIG BIG help >> > >> > Regard, >> > Alan >> > >> > _______________________________________________ >> > android-freerunner mailing list >> > [email protected] >> > http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org >> > >> > >> _______________________________________________ >> android-freerunner mailing list >> [email protected] >> http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org > > > _______________________________________________ > android-freerunner mailing list > [email protected] > http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org > > _______________________________________________ android-freerunner mailing list [email protected] http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
