Hi, Jim:
For your method, I couldn't update kernel file, right?
Because I verified my kernel file and it worked well on FR if I don't
update rootfs files, just only boot new kernel file by Qi.
Thanks for your answer.
Regard,
Alan
2009/8/3 Jim Ancona <[email protected]>
> No, just the img files (including kernel.img). Don't replace the other
> kernels in the installer.
>
> The install takes several minutes. If it hasn't completed in 10
> minutes or so, I'd probably start over.
>
> Jim
>
> On Sun, Aug 2, 2009 at 9:46 PM, bluestar8783<[email protected]>
> wrote:
> > Hi, Jim:
> >
> > You mean I just copy these *.img file and kernel file(uImage,
> > uImage.bin
> > and /boot/uImage-GTA02.bin), not including qi.img, into 1st
> partition(vfat)
> > on
> > SD-Card, it will auto-install, right?
> >
> > How long do I need to wait? I am afraid I feel the system hang on.
> >
> > Thanks for your help.
> > Regard,
> > Alan
> > 2009/8/2 Jim Ancona <[email protected]>
> >>
> >> I think the instructions on the wiki no longer apply since Koolu
> >> changed the install procedure in beta 4.
> >>
> >> If you are working from the current Koolu tree, after a build look in
> >> out/target/product/freerunner where you will find kernel.img,
> >> ramdisk.img, system.img and userdata.img. Just copy those four files
> >> over the versions in the Koolu install on your SD card, and reinstall
> >> the same way you installed beta 7. You should now be running your
> >> customized image.
> >>
> >> If someone can tell me how to update the kernel ramdis and system
> >> images without overwring the user file system I'd appreciate it. I
> >> hate loosing all my installed apps and settings every time I
> >> reinstall.
> >>
> >> Jim
> >>
> >> On Sat, Aug 1, 2009 at 9:42 PM, bluestar8783<[email protected]>
> >> wrote:
> >> > Hi,
> >> >
> >> > I already booted my customized kernel by putting in SD card and use
> >> > Qi.
> >> >
> >> > NOW I tried to flash my customized rootfs, but always hang on Koolu
> >> > logo.
> >> > My steps are below:
> >> >
> >> > 1. flash "Koolu Beta 7 Release" into FR-GTA02, and it works
> >> > well
> >> > 2. git source code(koolu-1.0 or capcake) from Koolu, add my
> >> > drivers
> >> > and rebuild for customized kernel
> >> > 3. only put kernel file on SD card(ext3 partition) and boot
> >> > from
> >> > Qi, it works well.
> >> >
> >> > 4. create jffs2 file by following
> >> > http://wiki.openmoko.org/wiki/Android_porting
> >> > #Building_the_Koolu_Android_Source and flash it, but hang
> >> > on
> >> > Koolu logo
> >> > 5. also replaced all img files of "Koolu Beta 7 Release", and
> >> > boot
> >> > from
> >> > SD card, but it still failed.
> >> >
> >> > Could anyone tell me how to flash customized rootfs successfully?
> >> > Thanks for your BIG BIG BIG help
> >> >
> >> > Regard,
> >> > Alan
> >> >
> >> > _______________________________________________
> >> > android-freerunner mailing list
> >> > [email protected]
> >> > http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
> >> >
> >> >
> >> _______________________________________________
> >> android-freerunner mailing list
> >> [email protected]
> >> http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
> >
> >
> > _______________________________________________
> > android-freerunner mailing list
> > [email protected]
> > http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
> >
> >
> _______________________________________________
> android-freerunner mailing list
> [email protected]
> http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
>
_______________________________________________
android-freerunner mailing list
[email protected]
http://android.koolu.org/listinfo.cgi/android-freerunner-koolu.org
