Luca: If I dont use WPA (and have no wpa_supplicant) is it OK just to change the wifi.c like this, and compile the module and make sure it is in the init.rc? Will it connect to a WEP protected network at that point?
static const char IFACE_DIR[] = "/data/system/ wpa_supplicant"; static const char DRIVER_MODULE_NAME[] = "ath5k"; static const char DRIVER_MODULE_TAG[] = "ath5k "; static const char DRIVER_MODULE_PATH[] = "/system/lib/modules/ ath5k.ko"; static const char FIRMWARE_LOADER[] = "wlan_loader"; static const char DRIVER_PROP_NAME[] = "wlan.driver.status"; Regards, Gani On Apr 21, 3:54 pm, Luca Belluccini <lucabellucc...@gmail.com> wrote: > I'm with the same module. I set it NOT built-in. > You are planning to make wifi interact with Android GUI? > I modified wifi.c specifying the right path to module to be insmodded. > By the way I'm having the same SIOCSIWAUTH error, starting manually > the wpa_supplicant. > I think it's the main problem. > > On 21 Apr, 12:59, Androidphan <niels.kee...@tass.nl> wrote: > > > I have an Atheros 5007EG wireless network card at my hardware > > platform. I compiled the kernel(2.6.27) with ath5k built in. > > > Then I compiled wpa_supplicant with CONFIG_WIRELESS_EXTENSIONS=y > > CONFIG_DRIVER_WEXT=y and CONFIG_CTRL_IFACE=y. > > > Then in my init.rc : > > mkdir /data/misc/wifi 0770 wifi wifi > > mkdir /data/misc/wifi/sockets 0770 wifi wifi > > mkdir /data/system/wpa_supplicant 0770 wifi wifi > > mkdir /data/misc/dhcp 0770 dhcp dhcp > > chown dhcp dhcp /data/misc/dhcp > > > ifup wlan0 > > > service wpa_supplicant /system/bin/logwrapper /system/bin/ > > wpa_supplicant -Dwext -iwlan0 -c/system/etc/wifi/wpa_supplicant.conf - > > dd > > group wifi > > > My wpa_supplicant.conf at /system/etc/wifi/wpa_supplicant.conf : > > > update_config=1 > > ctrl_interface=DIR=/data/system/wpa_supplicant GROUP=system > > > Then when I try to scan with: wpa_cli -p/data/system/wpa_supplicant - > > iwlan0 and then scan & scan_results, I'm getting no scan results, when > > I know there are definitly scan results. Because when I scanned with > > Windows, I do get to see scan results. > > > What is wrong with my configuration? > > > My logcat output from wpa_supplicant: > > > I//system/bin/wpa_supplicant( 2127): Initializing interface 'wlan0' > > conf '/system/etc/wifi/wpa_supplicant.conf' driver 'wext' > > ctrl_interface 'N/A' bridge 'N/A' > > I//system/bin/wpa_supplicant( 2127): Configuration file '/system/etc/ > > wifi/wpa_supplicant.conf' -> '/system/etc/wifi/wpa_supplicant.conf' > > I//system/bin/wpa_supplicant( 2127): Reading configuration file '/ > > system/etc/wifi/wpa_supplicant.conf' > > I//system/bin/wpa_supplicant( 2127): update_config=1 > > I//system/bin/wpa_supplicant( 2127): ctrl_interface='DIR=/data/system/ > > wpa_supplicant' > > I//system/bin/wpa_supplicant( 2127): Initializing interface (2) > > 'wlan0' > > I//system/bin/wpa_supplicant( 2127): EAPOL: SUPP_PAE entering state > > DISCONNECTED > > I//system/bin/wpa_supplicant( 2127): EAPOL: KEY_RX entering state > > NO_KEY_RECEIVE > > I//system/bin/wpa_supplicant( 2127): EAPOL: SUPP_BE entering state > > INITIALIZE > > I//system/bin/wpa_supplicant( 2127): EAP: EAP entering state DISABLED > > I//system/bin/wpa_supplicant( 2127): EAPOL: External notification - > > portEnabled=0 > > I//system/bin/wpa_supplicant( 2127): EAPOL: External notification - > > portValid=0 > > I//system/bin/wpa_supplicant( 2127): SIOCGIWRANGE: WE(compiled)=22 WE > > (source)=21 enc_capa=0xf > > I//system/bin/wpa_supplicant( 2127): capabilities: key_mgmt 0xf enc > > 0xf > > I//system/bin/wpa_supplicant( 2127): WEXT: Operstate: linkmode=1, > > operstate=5 > > I//system/bin/wpa_supplicant( 2127): Own MAC address: > > 00:22:43:2c:fa:a6 > > I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_wpa > > I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_key: alg=0 > > key_idx=0 set_tx=0 seq_len=0 key_len=0 > > I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_key: alg=0 > > key_idx=1 set_tx=0 seq_len=0 key_len=0 > > I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_key: alg=0 > > key_idx=2 set_tx=0 seq_len=0 key_len=0 > > I//system/bin/wpa_supplicant( 2127): wpa_driver_wext_set_key: alg=0 > > key_idx=3 set_tx=0 seq_len=0 key_len=0 > > I//system/bin/wpa_supplicant( 2127): > > wpa_driver_wext_set_countermeasures > > I//system/bin/wpa_supplicant( 2127): ioctl[SIOCSIWAUTH]: Operation not > > supported on transport endpoint > > I//system/bin/wpa_supplicant( 2127): WEXT auth param 4 value 0x0 - > > wpa_driver_wext_set_drop_unencrypted > > I//system/bin/wpa_supplicant( 2127): Setting scan request: 0 sec > > 100000 usec > > I//system/bin/wpa_supplicant( 2127): Using existing control interface > > directory. > > I//system/bin/wpa_supplicant( 2127): ctrl_iface bind(PF_UNIX) failed: > > Address already in use > > I//system/bin/wpa_supplicant( 2127): ctrl_iface exists, but does not > > allow connections - assuming it was leftover from forced program > > termination > > I//system/bin/wpa_supplicant( 2127): Successfully replaced leftover > > ctrl_iface socket '/data/system/wpa_supplicant/wlan0' > > I//system/bin/wpa_supplicant( 2127): Added interface wlan0 > > I//system/bin/wpa_supplicant( 2127): RTM_NEWLINK: operstate=0 > > ifi_flags=0x1003 ([UP]) > > I//system/bin/wpa_supplicant( 2127): RTM_NEWLINK, IFLA_IFNAME: > > Interface 'wlan0' added > > I//system/bin/wpa_supplicant( 2127): Wireless event: cmd=0x8b06 len=8 > > I//system/bin/wpa_supplicant( 2127): State: DISCONNECTED -> SCANNING > > I//system/bin/wpa_supplicant( 2127): CTRL-EVENT-STATE-CHANGE id=-1 > > state=2 > > I//system/bin/wpa_supplicant( 2127): Starting AP scan (broadcast SSID) > > I//system/bin/wpa_supplicant( 2127): Trying to get current scan > > results first without requesting a new scan to speed up initial > > association > > I//system/bin/wpa_supplicant( 2127): Received 0 bytes of scan results > > (0 BSSes) > > I//system/bin/wpa_supplicant( 2127): Scan results: 0 > > I//system/bin/wpa_supplicant( 2127): CTRL-EVENT-SCAN-RESULTS Ready > > I//system/bin/wpa_supplicant( 2127): No suitable AP found. > > I//system/bin/wpa_supplicant( 2127): Setting scan request: 0 sec 0 > > usec > > I//system/bin/wpa_supplicant( 2127): No enabled networks - do not scan > > I//system/bin/wpa_supplicant( 2127): State: SCANNING -> INACTIVE > > I//system/bin/wpa_supplicant( 2127): CTRL-EVENT-STATE-CHANGE id=-1 > > state=1 > > ..... > > ..... > > I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii > > (len=6): > > I//system/bin/wpa_supplicant( 2127): 53 54 41 54 55 > > 53 STATUS > > I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii > > (len=11): > > I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 52 53 > > 53 49 DRIVER RSSI > > I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii > > (len=16): > > I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 4c 49 > > 4e 4b 53 50 45 45 44 DRIVER LINKSPEED > > I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii > > (len=14): > > I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 4d 41 > > 43 41 44 44 52 DRIVER MACADDR > > V/WifiStateTracker( 2137): Connection to supplicant established, > > state=INACTIVE > > I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii > > (len=21): > > I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 52 58 > > 46 49 4c 54 45 52 2d DRIVER RXFILTER- > > I//system/bin/wpa_supplicant( 2127): 41 44 44 20 > > 30 ADD 0 > > I//system/bin/wpa_supplicant( 2127): RX ctrl_iface - hexdump_ascii > > (len=22): > > I//system/bin/wpa_supplicant( 2127): 44 52 49 56 45 52 20 42 54 > > 43 4f 45 58 53 43 41 DRIVER BTCOEXSCA > > I//system/bin/wpa_supplicant( 2127): 4e 2d 53 54 4f > > 50 N-STOP > > .... > > .... > > I//system/bin/wpa_supplicant( 2127): 42 4c 41 43 4b 4c 49 53 54 > > 20 63 6c 65 61 72 BLACKLIST clear > > I//system/bin/wpa_supplicant( 2127): CTRL_IFACE: bssid=' clear' > > I//system/bin/wpa_supplicant( 2127): Setting scan request: 0 sec 0 > > usec > > I//system/bin/wpa_supplicant( 2127): No enabled networks - do not scan > > I//system/bin/wpa_supplicant( 2127): State: INACTIVE -> INACTIVE > > I//system/bin/wpa_supplicant( 2127): CTRL-EVENT-STATE-CHANGE id=-1 > > state=1 > > I//system/bin/wpa_supplicant( 2127): CTRL_IFACE monitor send - hexdump > > (len=40): 2f 64 61 74 61 2f 6d 69 73 63 2f 77 69 66 69 2f 73 6f 63 6b > > 65 74 73 2f 77 70 61 5f 63 74 72 6c 5f 32 31 33 37 2d 31 00 > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
