Hi All, I have TI OMAP 3530 from logicpd.
It has tsc2004 touchscreen. Android is booting on and on getevent i am getting teh touchscreen events. But Its not mapped with android. First android orientation is in landscape mode. So that might be the problem. ?? How you people have solved this issue. Thanks & Regards Nimit On Wed, May 13, 2009 at 12:12 PM, Androidphan <[email protected]> wrote: > > Be aware that your touch screen need to be calibrated first. > > On May 13, 7:43 am, Suhas <[email protected]> wrote: > > Okay... Thanks a lot > > > > On May 13, 10:41 am, Claw <[email protected]> wrote: > > > > > As mentioned earlier by Androidphan, building in the androidpower > > > module into the linux kernel solved the problem for us. > > > > > On May 13, 10:38 am, Suhas <[email protected]> wrote: > > > > > > So your problem got solved on enabling thepowermanagement? > > > > > > On May 13, 12:05 am, Androidphan <[email protected]> wrote: > > > > > > > I had to use tslib as well, the x and y values should match the x > and > > > > > y values from the resolution. I never get a hold on those patches, > but > > > > > I integrated the pointercal values in the kernel driver, which is a > > > > > rather bad way. > > > > > > > On 12 mei, 18:22, Suhas <[email protected]> wrote: > > > > > > > > Even I am facing the same problem. > > > > > > > > I can observe the touch screen events with getevent command. > > > > > > > > Also, similar to Drakou, top bar expands and displays the > > > > > > date when I tap anywhere on the screen, the action is always the > same. > > > > > > I can't do anything else. > > > > > > > > Drakou, did you get this thing working? > > > > > > > > I also tried enabling Androidpowermanagement, but no luck. > > > > > > > > One more thing is regarding calibration. > > > > > > I am using a resistive touch screen and ucb1400 as ts controller. > > > > > > The co-ordinates, I get from controller are like > > > > > > Top Left (100,900) and Bottom Right (900,100) > > > > > > Screen REsolution is 320x240. > > > > > > How do Android relate these values? > > > > > > > > I think I have to use tslib for calibration of touch screen. Is > it > > > > > > required? > > > > > > If yes, then can you help me get the Sean Mcneal's tslib patches > for > > > > > > Android from. > > > > > > > > Thanks in Advance, > > > > > > > > Suhas Jain > > > > > > > > On May 12, 3:45 pm, Androidphan <[email protected]> wrote: > > > > > > > > > You maybe missing Androidpowermanagementin the kernel. > > > > > > > > > On May 12, 12:12 pm, Drakou <[email protected]> wrote: > > > > > > > > > > Hello, > > > > > > > > > > I am trying to make a port of Android for Freescale Mx27 SoC. > > > > > > > > Everything is working for the moment, except thetouchscreen. > I > > > > > > > > already rode all the posts about Mx31touchscreenproblems ( > Mx31 is > > > > > > > > also using Mc13783 fortouchscreen) . I applied the patches > but that > > > > > > > > does not solve my problem anymore. > > > > > > > > > > When I touch the screen, the top bar is expanding and > displaying the > > > > > > > > date. I can tap anywhere on the screen, the action is always > the same. > > > > > > > > I can't do anything else. When I remove the stylus, the top > bar hide. > > > > > > > > > > If I use the getenvent command, I can see > thetouchscreenevents, it's > > > > > > > > working well. So I really don't know where to find the > problem. > > > > > > > > > > Any Ideas ? > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
