Androidphan, You mentioned about caliberation.. so can you share the caliberation tools
so that I can caliberate my touchscren with android. Thanks & Regards Nimit On Mon, May 25, 2009 at 12:15 PM, Nimit Manglick <[email protected]>wrote: > Hi All, > > I have TI OMAP 3530 from logicpd. > > It has tsc2004 touchscreen. Android is booting on and on getevent i am > getting teh touchscreen events. > > But Its not mapped with android. First android orientation is in landscape > mode. > > So that might be the problem. ?? > > How you people have solved this issue. > > Thanks & Regards > Nimit > > > On Wed, May 13, 2009 at 12:12 PM, Androidphan <[email protected]>wrote: > >> >> Be aware that your touch screen need to be calibrated first. >> >> On May 13, 7:43 am, Suhas <[email protected]> wrote: >> > Okay... Thanks a lot >> > >> > On May 13, 10:41 am, Claw <[email protected]> wrote: >> > >> > > As mentioned earlier by Androidphan, building in the androidpower >> > > module into the linux kernel solved the problem for us. >> > >> > > On May 13, 10:38 am, Suhas <[email protected]> wrote: >> > >> > > > So your problem got solved on enabling thepowermanagement? >> > >> > > > On May 13, 12:05 am, Androidphan <[email protected]> wrote: >> > >> > > > > I had to use tslib as well, the x and y values should match the x >> and >> > > > > y values from the resolution. I never get a hold on those patches, >> but >> > > > > I integrated the pointercal values in the kernel driver, which is >> a >> > > > > rather bad way. >> > >> > > > > On 12 mei, 18:22, Suhas <[email protected]> wrote: >> > >> > > > > > Even I am facing the same problem. >> > >> > > > > > I can observe the touch screen events with getevent command. >> > >> > > > > > Also, similar to Drakou, top bar expands and displays the >> > > > > > date when I tap anywhere on the screen, the action is always the >> same. >> > > > > > I can't do anything else. >> > >> > > > > > Drakou, did you get this thing working? >> > >> > > > > > I also tried enabling Androidpowermanagement, but no luck. >> > >> > > > > > One more thing is regarding calibration. >> > > > > > I am using a resistive touch screen and ucb1400 as ts >> controller. >> > > > > > The co-ordinates, I get from controller are like >> > > > > > Top Left (100,900) and Bottom Right (900,100) >> > > > > > Screen REsolution is 320x240. >> > > > > > How do Android relate these values? >> > >> > > > > > I think I have to use tslib for calibration of touch screen. Is >> it >> > > > > > required? >> > > > > > If yes, then can you help me get the Sean Mcneal's tslib >> patches for >> > > > > > Android from. >> > >> > > > > > Thanks in Advance, >> > >> > > > > > Suhas Jain >> > >> > > > > > On May 12, 3:45 pm, Androidphan <[email protected]> wrote: >> > >> > > > > > > You maybe missing Androidpowermanagementin the kernel. >> > >> > > > > > > On May 12, 12:12 pm, Drakou <[email protected]> wrote: >> > >> > > > > > > > Hello, >> > >> > > > > > > > I am trying to make a port of Android for Freescale Mx27 >> SoC. >> > > > > > > > Everything is working for the moment, except thetouchscreen. >> I >> > > > > > > > already rode all the posts about Mx31touchscreenproblems ( >> Mx31 is >> > > > > > > > also using Mc13783 fortouchscreen) . I applied the patches >> but that >> > > > > > > > does not solve my problem anymore. >> > >> > > > > > > > When I touch the screen, the top bar is expanding and >> displaying the >> > > > > > > > date. I can tap anywhere on the screen, the action is always >> the same. >> > > > > > > > I can't do anything else. When I remove the stylus, the top >> bar hide. >> > >> > > > > > > > If I use the getenvent command, I can see >> thetouchscreenevents, it's >> > > > > > > > working well. So I really don't know where to find the >> problem. >> > >> > > > > > > > Any Ideas ? >> >> >> > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
