2009/9/15 sanyanniesunney anniesunney <[email protected]>: > I get the following error when i am using the prebuilt images... > Plz help! >
hi, >From the below messages, it seems that you are using older bootloader. For newer ones, u-boot should be set to take the file "uImage.bin" as Linux kernel image instead of "uImage". So, the solution is to rename file "uImage.bin" to "uImage" on your SD card, and then retry. Thanks, Jim Huang (jserv) http://0xlab.org/ > Texas Instruments X-Loader 1.41 > Starting OS Bootloader... > > > U-Boot 2008.10-rc2 (Oct 2 2008 - 09:02:46) > > OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz > OMAP3 Beagle board + LPDDR/NAND > DRAM: 128 MB > NAND: 256 MiB > In: serial > Out: serial > Err: serial > Hit any key to stop autoboot: 0 > reading uImage > > ** Unable to read "uImage" from mmc 0:1 ** > reading rd-ext2.bin > > ** Unable to read "rd-ext2.bin" from mmc 0:1 ** > Wrong Image Format for bootm command > ERROR: can't get kernel image! --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
